Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsTriac, TO-220AB, 600V, 16A

1/9

Table 1: Main Features

DESCRIPTION

Available either in through-hole or surface-mount

packages, the BTA16, BTB16 and T16 triac series

is suitable for general purpose AC switching. They

can be used as an ON/OFF function in applica-

tions such as static relays, heating regulation, in-

duction motor starting circuits... or for phase

control operation in light dimmers, motor speed

controllers, ...

The snubberless versions (BTA/BTB...W and T16

series) are specially recommended for use on in-

ductive loads, thanks to their high commutation

performances. By using an internal ceramic pad,

the BTA series provides voltage insulated tab (rat-

ed at 2500V

RMS

) complying with UL standards

(File ref.: E81734).

Symbol Value Unit

T(RMS)

16 A

DRM

RRM

600, 700 and 800 V

GT (Q

)

10 to 50 mA

BTA16, BTB16 and T16 Series

16A TRIACS

REV. 7February 2006

SNUBBERLESS™, LOGIC LEVEL & STANDARD

Table 2: Order Codes

Part Number Marking

BTA16-xxxxxRG

See page table 8 on

page 8

BTB16-xxxxxRG

T16xx-xxxG

PAK

(T16-G)

TO-220AB Insulated

(BTA16)

TO-220AB

(BTB16)

Summary of content (9 pages)

PAGE 1
BTA16, BTB16 and T16 Series ® 16A TRIACS SNUBBERLESS™, LOGIC LEVEL & STANDARD Table 1: Main Features A2 Symbol Value Unit IT(RMS) 16 A VDRM/VRRM 600, 700 and 800 V IGT (Q1) 10 to 50 mA G A1 A2 A1 A2 G DESCRIPTION Available either in through-hole or surface-mount packages, the BTA16, BTB16 and T16 triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits...
PAGE 2
BTA16, BTB16 and T16 Series Table 3: Absolute Maximum Ratings Symbol IT(RMS) ITSM I²t dI/dt Parameter RMS on-state current (full sine wave) D2PAK / TO-220AB Tc = 100°C TO-220AB Ins.
PAGE 3
BTA16, BTB16 and T16 Series ■ Standard (4 quadrants) Symbol IGT (1) Quadrant RL = 33 Ω I - II - III IV MAX. ALL MAX. 1.3 V ALL MIN. 0.2 V VD = 12 V VGT VGD VD = VDRM RL = 3.3 kΩ Tj = 125°C IH (2) IT = 500 mA IL IG = 1.2 IGT dV/dt (2) BTA16 / BTB16 Test Conditions MAX. I - III - IV II VD = 67 %VDRM gate open (dV/dt)c (2) (dI/dt)c = 7 A/ms MAX. C B 25 50 50 100 25 50 40 60 80 120 Unit mA mA mA Tj = 125°C MIN. 200 400 V/µs Tj = 125°C MIN.
PAGE 4
BTA16, BTB16 and T16 Series Figure 1: Maximum power dissipation versus RMS on-state current (full cycle) Figure 2: RMS on-state current versus case temperature (full cycle) P(W) IT(RMS)(A) 20 18 18 16 16 BTB / T16 14 BTA 14 12 12 10 10 8 8 6 6 4 4 2 2 IT(RMS)(A) TC(°C) 0 0 0 2 4 6 8 10 12 14 0 16 Figure 3: RMS on-state current versus ambient temperature (printed circuit board FR4, copper thickness: 35µm) (full cycle) 25 50 75 100 125 Figure 4: Relative variation of t
PAGE 5
BTA16, BTB16 and T16 Series Figure 7: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms and corresponding value of I2t Figure 8: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25°C] ITSM(A), I2t (A2s) 2.5 3000 Tj initial=25°C dI/dt limitation: 50A/µs 2.0 IGT 1000 1.5 ITSM IH & IL 1.0 I2t 0.5 Tj(°C) tp(ms) 0.0 100 0.01 0.10 1.00 -40 10.
PAGE 6
BTA16, BTB16 and T16 Series Figure 12: Ordering Information Scheme (BTA16 and BTB16 series) BT A 16 - 600 BW RG Triac series Insulation A = insulated B = non insulated Current 16 = 16A Voltage 600 = 600V 700 = 700V 800 = 800V Sensitivity and type B = 50mA Standard C = 25mA Standard SW = 10mA Logic Level BW = 50mA Snubberless CW = 35mA Snubberless Packing mode RG = Tube Figure 13: Ordering Information Scheme (T16 series) T 16 35 - 600 G (-TR) Triac series Current 16 = 16A Sensitivity 35 = 35mA Voltage 60
PAGE 7
BTA16, BTB16 and T16 Series Figure 14: D2PAK Package Mechanical Data DIMENSIONS REF. E C2 L2 D L L3 A1 B2 R C Millimeters Min. A B G A2 2mm min. FLAT ZONE V2 Typ. Inches Max. Min. Typ. Max. A 4.30 4.60 0.169 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.25 C 0.45 0.60 0.017 C2 1.21 1.36 0.047 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.28 0.393 0.405 G 4.88 5.28 0.192 0.208 1.40 0.048 0.055 0.024 L 15.00 15.85 0.
PAGE 8
BTA16, BTB16 and T16 Series Figure 16: TO-220AB Package Mechanical Data REF. C B ØI b2 L F A I4 l3 c2 a1 l2 a2 M c1 b1 e A a1 a2 B b1 b2 C c1 c2 e F ØI I4 L l2 l3 M DIMENSIONS Millimeters Inches Min. Typ. Max. Min. Typ. 15.20 15.90 0.598 3.75 0.147 13.00 14.00 0.511 10.00 10.40 0.393 0.61 0.88 0.024 1.23 1.32 0.048 4.40 4.60 0.173 0.49 0.70 0.019 2.40 2.72 0.094 2.40 2.70 0.094 6.20 6.60 0.244 3.75 3.85 0.147 15.80 16.40 16.80 0.622 0.646 2.65 2.95 0.104 1.14 1.70 0.044 1.14 1.70 0.044 2.60 0.
PAGE 9
BTA16, BTB16 and T16 Series Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice.