Datasheet

ManualsBrandsST ManualsDiodesESD Protection Diode, Bi-Directional, 24V, SOT-23

Features

• AEC-Q101 qualified

• Dual-line ESD and EOS protection

• Breakdown voltage: V

– ESDCAN01-2BLY: 25 V

– ESDCAN24-2BLY: 27 V

– ESDCAN04-2BLY: 27.5 V

– ESDCAN06-2BLY: 38 V

• Bidirectional device

• Max pulse power up to 230 W (8/20 μs)

• Low clamping factor V

/ V

• Low leakage current

• ECOPACK ROHS compliant component

Complies with the following standards

• UL94, V0

• J-STD-020 MSL level 1

• IPC7531 footprint and JEDEC registered package

• ISO 16750-2 (Jump start and reversed battery tests)

• ISO 10605 - C = 150 pF, R = 330 Ω, exceeds level 4:

– ±30 kV (air discharge)

– ±30 kV (contact discharge)

• ISO 10605 - C = 330 pF, R = 330 Ω exceeds level 4:

– ±30 kV (air discharge)

– ±30 kV (contact discharge)

• ISO 7637-3:

– Pulse 3a: -150 V

– Pulse 3b: +150 V

– Pulse 2a: +/- 85 V

Applications

Automotive controller area network (CAN) bus lines where electrostatic discharges

and other transients must be suppressed. This product is compliant with most of

automotive interfaces.

Description

The ESDCAN0xx-2BLY are dual-line TVS specifically designed for the protection of

automotive CAN bus lines against electrostatic discharge (ESD).

Its improved parameters make it compliant with all key interfaces in automotive:

CAN-FD, LIN, FlexRay, MOST, SENT, USB, etc.

Product status link

ESDCANxx-2BLY

ESDCAN01-2BLY,

ESDCAN24-2BLY,

ESDCAN04-2BLY,

ESDCAN06-2BLY

Automotive dual-line TVS in SOT23-3L for CAN bus

ESDCANxx-2BLY

Datasheet

DS11111 - Rev 3 - April 2019

For further information contact your local STMicroelectronics sales office.

www.st.com

Summary of content (14 pages)

PAGE 1
ESDCANxx-2BLY Datasheet Automotive dual-line TVS in SOT23-3L for CAN bus Features 1 3 2 Product status link ESDCANxx-2BLY ESDCAN01-2BLY, ESDCAN24-2BLY, ESDCAN04-2BLY, ESDCAN06-2BLY • • • AEC-Q101 qualified Dual-line ESD and EOS protection Breakdown voltage: VBR • • • – ESDCAN01-2BLY: 25 V – ESDCAN24-2BLY: 27 V – ESDCAN04-2BLY: 27.
PAGE 2
ESDCANxx-2BLY Characteristics 1 Characteristics Table 1.
PAGE 3
ESDCANxx-2BLY Characteristics Table 2. Electrical characteristics (values, Tamb = 25 °C) IRM max. at VRM VBR at IR VCLPulse ISO7637-3 3a at -150 V min. Min. Max. Order code µA V V mA ESDCAN24-2BLY 0.1 24 27 32 1 -40 ESDCAN01-2BLY 0.1 24 25 30 1 ESDCAN04-2BLY 0.05 25.5 ESDCAN06-2BLY 0.1 35 27.5 30.7 38 42.2 3b at +150 V max. V VCL at IPP (8/20 µs) Max. ΔC(1) αT(2) Typ. Max. Typ. Typ. C pF 10-4/°C 30 0.1 9 - 30 0.1 9 3 17 19 0.1 9 3 13 15 0.
PAGE 4
ESDCANxx-2BLY Characteristics (curves) 1.1 Characteristics (curves) Figure 2. Maximum peak current versus initial junction temperature Ipp (A) 6 8/20 µs ESDCAN24-2BLY ESDCAN01-2BLY ESDCAN04-2BLY ESDCAN06-2BLY 5 4 3 2 1 0 Tj (°C) 0 25 50 Figure 3. Maximum peak pulse current versus exponential pulse duration 10 IPP (A) 75 100 125 150 175 200 Figure 4.
PAGE 5
ESDCANxx-2BLY Characteristics (curves) Figure 5. Junction capacitance versus reverse voltage C (pF) 100 Figure 6. Leakage current versus junction temperature 100.0 f = 1 MHz Vosc = 30 mVRMS Tj = 25 °C ESDCAN24-2BLY ESDCAN01-2BLY ESDCAN04-2BLY ESDCAN06-2BLY IR (nA) 10.0 10 1.0 VR = VRM ESDCAN24-2BLY ESDCAN01-2BLY ESDCAN04-2BLY ESDCAN06-2BLY 0.1 1 VR (V) 0 5 10 15 20 25 30 35 40 Figure 7. Response to ISO 10605 -C = 150 pF, R = 330 Ω (-8 kV contact) 0.
PAGE 6
ESDCANxx-2BLY Characteristics (curves) Figure 10. Response to ISO 7637-3 Pulse 3b : +150 V Figure 11. Response to ISO 7637-3 pulse 2a: -85 V Figure 12.
PAGE 7
ESDCANxx-2BLY Characteristics (curves) Figure 13. S21 attenuation Figure 14.
PAGE 8
ESDCANxx-2BLY Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 SOT23-3L package information Figure 15. SOT23-3L package outline D 0.25 Gauge plane A a A1 Seating plane L L1 B 3 E H 1 2 e S c e1 PROJECTION Table 3.
PAGE 9
ESDCANxx-2BLY SOT23-3L package information Figure 16. SOT23-3L marking Figure 17. SOT23-3L footprint in mm 2.43 1.90 0.95 1.37 XXXX 1.01 0.69 0.540 3.10 1.08 1.01 XXXX : Marking 0.53 Figure 18. Package orientation in reel Figure 19. Tape and reel orientation Pin 1 located according to EIA-481 Note: Pocket dimensions are not on scale Pocket shape may vary depending on package Figure 20. 7'' reel dimension values Figure 21. Inner box dimension values 30 Ø 180 max 14.4 2±0.
PAGE 10
ESDCANxx-2BLY SOT23-3L package information Figure 22. Tape outline Table 4. Tape dimension values Dimensions Millimeters Ref. DS11111 - Rev 3 Min. Typ. Max. D0 1.45 1.5 1.6 D1 1 F 3.45 3.5 3.55 K0 1.3 1.4 1.5 P0 3.9 4.0 4.1 P1 3.9 4.0 4.1 P2 1.95 2.0 2.05 W 7.9 8 8.
PAGE 11
ESDCANxx-2BLY Reflow profile 3 Reflow profile Figure 23. ST ECOPACK® recommended soldering reflow profile for PCB mounting 250 240-245 °C Temperature (°C) -2 °C/s 2 - 3 °C/s 60 sec (90 max) 200 -3 °C/s 150 -6 °C/s 100 0.9 °C/s 50 Time (s) 0 Note: DS11111 - Rev 3 30 60 90 120 150 180 210 240 270 300 Minimize air convection currents in the reflow oven to avoid component movement. Maximum soldering profile corresponds to the latest IPC/JEDEC J-STD-020.
PAGE 12
ESDCANxx-2BLY Ordering information 4 Ordering information Figure 24. Ordering information scheme Table 5. Ordering information Order code Marking(1) ESDCAN24-2BLY EL24 ESDCAN01-2BLY EN24 ESDCAN04-2BLY EC24 ESDCAN06-2BLY EC35 Package Weight Base qty. Delivery mode SOT23-3L 9.8 mg 3000 Tape and reel 1.
PAGE 13
ESDCANxx-2BLY Revision history Table 6. Document revision history Date Revision 13-Jul-2015 1 Changes First issue. Added RPN ESDCAN04-2BLY and ESDCAN06-2BLY. 04-Oct-2018 2 Updated cover page, Section 1 Characteristics and Section 1.1 Characteristics (curves). Added Packing information. 05-Apr-2019 DS11111 - Rev 3 3 Added typical pitch in Table 3 and updated Figure 17.
PAGE 14
ESDCANxx-2BLY IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.