Datasheet

ManualsBrandsST ManualsEmbedded Processors & ControllersDual D Flip-Flop with Clear / Preset PDIP 24MHz

1/9September 2001

■ SET - RESET CAPABILITY

■ STATIC FLIP-FLOP OPERATION - RETAINS

STATE INDEFINITELY WITH CLOCK LEVEL

EITHER "HIGH" OR "LOW"

■ MEDIUM SPEED OPERATION 16MHz (TYP.)

CLOCK TOGGLE RATE AT 10V

■ STANDARDIZED SYMMETRICAL OUTPUT

CHARACTERISTICS

■ QUIESCENT CURRENT SPECIFIED UP TO

20V

■ 5V, 10V AND 15V PARAMETRIC RATINGS

■ INPUT LEAKAGE CURRENT

= 100nA (MAX) AT V

= 18V T

= 25°C

■ 100% TESTED FOR QUIESCENT CURRENT

■ MEETS ALL REQUIREMENTS OF JEDEC

JESD13B " STANDARD SPECIFICATIONS

FOR DESCRIPTION OF B SERIES CMOS

DEVICES"

DESCRIPTION

The HCF4013B is a monolithic integrated circuit

fabricated in Metal Oxide Semiconductor

technology available in DIP and SOP packages.

The HCF4013B consists of two identical,

independent data type flip-flops. Each flip-flop has

independent data, set, reset, and clock inputs and

Q and Q

outputs. This device can be used for shift

output

to the data input, for counter and toggle

applications. The logic level present at the D input

is transferred to the Q

output during the

positive-going transition of the clock pulse. Setting

or resetting is independent of the clock and is

accomplished by a high level on the set or reset

line, respectively

HCF4013B

DUAL D-TYPE FLIP FLOP

PIN CONNECTION

ORDER CODES

PACKAGE TUBE T & R

DIP HCF4013BEY

SOP HCF4013BM1 HCF4013M013TR

DIP SOP

Summary of content (9 pages)

PAGE 1
HCF4013B DUAL D-TYPE FLIP FLOP ■ ■ ■ ■ ■ ■ ■ ■ ■ SET - RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINITELY WITH CLOCK LEVEL EITHER "HIGH" OR "LOW" MEDIUM SPEED OPERATION 16MHz (TYP.
PAGE 2
HCF4013B INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL NAME AND FUNCTION 7 CLOCK1 CLOCK2 RESET1 RESET2 SET1, SET2 D1, D2 Q1, Q2 Q1, Q2 VSS 14 VDD 3, 11 4, 10 6, 8 5, 9 1, 13 2, 12 Clock Inputs Reset Inputs Set Inputs Data Inputs Data Outputs Data Outputs Negative Supply Voltage Positive Supply Voltage TRUTH TABLE LOGIC DIAGRAM CLOCK∆ X X X D RESET SET Q Q L L L L H H L L H L X L L Q Q X X X H L H L H H L H H H L H X : Don’t Care ∆ : Low Level ABSOLUTE MAXIMUM
PAGE 3
HCF4013B DC SPECIFICATIONS Test Condition Symbol IL VOH VOL VIH VIL IOH IOL II CI Parameter Quiescent Current High Level Output Voltage Low Level Output Voltage VI (V) 0/5 0/10 0/15 0/20 0/5 0/10 0/15 5/0 10/0 15/0 High Level Input Voltage Low Level Input Voltage Output Drive Current Output Sink Current Input Leakage Current Input Capacitance VO (V) 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0/18 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 0.4 0.5 1.
PAGE 4
HCF4013B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ, tr = tf = 20 ns) Test Condition Symbol Parameter tTLH tTHL Propagation Delay Time (CLOCK to Q or Q outputs) tPLH tPHL Propagation Delay Time (SET to Q or RESET to Q) Propagation Delay Time(SET to Q or RESET to Q) tTHL tTLH Transition Time fCL (1) tW tr , tf (2) tW tsetup Maximum Clock Input Frequency Clock Pulse Width Clock Input Rise or Fall Time Set or Reset Pulse Width Data Setup Time VDD (V) 5 10 15 5 10 15 5
PAGE 5
HCF4013B TEST CIRCUIT CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200KΩ RT = ZOUT of pulse generator (typically 50Ω) WAVEFORM 1 : CLOCK TO Qn, Qn PROPAGATION DELAY TIMES, Dn TO CLOCK SETUP AND HOLD TIMES, CLOCK MINIMUM PULSE WITDH, MAXIMUM CLOCK FREQUENCY (f=1MHz; 50% duty cycle) 5/9
PAGE 6
HCF4013B WAVEFORM 2 : PROPAGATION DELAY TIMES (Qn, Qn TO SET, RESET), MINIMUM PULSE WIDTH (SET AND RESET) (f=1MHz; 50% duty cycle) 6/9
PAGE 7
HCF4013B Plastic DIP-14 MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 1.39 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.
PAGE 8
HCF4013B SO-14 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.
PAGE 9
HCF4013B Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice.