Datasheet

ManualsBrandsST ManualsAnalogue Multiplexers / DemultiplexersMultiplexer/ Demultiplexer IC, Single/8:1, 3 ... 20V, SO-16

This is information on a product in full production.

April 2013 DocID2053 Rev 3 1/15

HCF4051

Single 8-channel analog multiplexer/demultiplexer

Datasheet - production data

Features

• Low “ON” resistance: 125 Ω (typ.)

• Over 15 V p.p signal-input range for

- V

= 15 V

• High “OFF” resistance, channel leakage:

± 100 pA (typ.) at V

- V

= 18 V

• Binary address decoding on chip

• High degree of linearity: < 0.5 % distortion typ.

at f

= 1 KHz, V

= 5 V

, V

- V

≥ 10 V,

= 10 kΩ

• Very low quiescent power dissipation under all

digital control input and supply conditions:

0.2 μW (typ.) V

- V

= V

- V

= 10 V

• Matched switch characteristics:

= 5 Ω (typ.) for V

- V

= 15 V

• Wide range of digital and analog signal levels:

digital 3 to 20, analog to 20 V p.p.

• Quiescent current specified up to 20 V

• 5 V, 10 V and 15 V parametric ratings

• ESD performance

–HBM: 2 kV

– MM: 200 V

– CDM: 750 V

• Input leakage current I

= 100 nA (max.) at

= 18 V, T

= 25 °C

• 100 % tested for quiescent current

Applications

• Automotive

• Industrial

• Computer

• Consumer

Description

The HCF4051 device is a monolithic integrated

circuit fabricated in MOS (metal oxide

semiconductor) technology available in SO-16

and PDIP-16 packages.

The HCF4051 analog multiplexer/demultiplexer is

a digitally controlled analog switch having low ON

impedance and very low OFF leakage current.

This multiplexer circuit dissipates extremely low

quiescent power over the full

VDD

- V

and

- V

supply voltage range, independent of

the logic state of the control signals.

This device is a single 8-channel multiplexer

having three binary control inputs, A, B, and C,

and an inhibit input. The three binary signals

select 1 of 8 channels to be turned on, and

connect one of the 8 inputs to the output. When a

logic “1” is present at the inhibit input terminal all

channels are off.

3',3 62



Table 1. Device summary

Order code Temperature range Package Packaging Marking

HCF4051M013TR -55/+125 °C SO-16

Tape and reel

HCF4051

HCF4051YM013TR

(1)

-40/+125 °C SO16 (automotive version) HCF4051Y

HCF4051BEY -55/+125 °C PDIP-16 Tube HCF4051BE

1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC

Q001 and Q002 or equivalent.

www.st.com

Summary of content (15 pages)

PAGE 1
HCF4051 Single 8-channel analog multiplexer/demultiplexer Datasheet - production data • Input leakage current II = 100 nA (max.) at VDD = 18 V, TA = 25 °C • 100 % tested for quiescent current 3',3 Applications 62 • Automotive Features • Industrial • Low “ON” resistance: 125 Ω (typ.) • Computer • Over 15 V p.p signal-input range for VDD - VEE = 15 V • Consumer Description • High “OFF” resistance, channel leakage: ± 100 pA (typ.
PAGE 2
Contents HCF4051 Contents 1 Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.1 PDIP-16 (0.25) package information . . . . . .
PAGE 3
HCF4051 1 Pin information Pin information Figure 1. Pin connections (top view) 9'' ,1+ $ 9(( % 966 & &+$11(/6 ,1 287 &20 287 ,1 &+$11(/6 ,1 287 &+$11(/6 ,1 287 6 Table 2. Pin description Pin no.
PAGE 4
Functional description 2 HCF4051 Functional description Table 3. Truth table Input states “ON” channel (S) Inhibit C B A 0 0 0 0 0 0 0 0 1 1 0 0 1 0 2 0 0 1 1 3 0 1 0 0 4 0 1 0 1 5 0 1 1 0 6 0 1 1 1 7 1 X X X None Figure 2.
PAGE 5
HCF4051 Functional description Figure 3.
PAGE 6
Electrical characteristics 3 HCF4051 Electrical characteristics Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. Table 4. Absolute maximum ratings Symbol VDD Parameter Supply voltage Value -0.5 to +22 VI DC input voltage -0.5 to VDD + 0.
PAGE 7
HCF4051 Electrical characteristics Table 6. DC specifications Test condition Symbol Parameter VIS (V) VEE (V) Value VSS (V) Quiescent device current (all switches ON or all switches OFF) IL VDD (V) TA = 25 °C -55 to 125 °C Unit Min. Typ. Max. Min. Max. 5 0.04 5 150 10 0.04 10 300 15 0.04 20 600 20 0.08 100 3000 5 470 1050 1200 10 180 400 520 15 125 280 360 5 10 10 10 15 5 18 ±0.
PAGE 8
Electrical characteristics HCF4051 Table 7. Dynamic electrical characteristics (Tamb = 25 °C, CL = 50 pF, all input square wave rise and fall time = 20 ns)(1) Test condition Parameter VEE (V) Propagation delay time (signal input to output) Frequency response channel “ON” (sine wave input) at 20 log VO/VI = -3 dB fI (KHz) = VSS = VSS Frequency signal crosstalk at 20 log VO/VI = -40 dB = VSS = VSS VSS (V) Min. Typ. Max.
PAGE 9
HCF4051 Electrical characteristics Figure 4. Typical bias voltages 9'' 9 9'' 9 9'' 9 9 9(( 9 966 9 9 966 9 966 9 9(( 9 9'' 9 6 9(( 9 9 966 9 6 9(( 9 6 6 1. The ADDRESS (digital-control inputs) and INHIBIT logic levels are : “0” = VSS and “1” = VDD. The analog signal (through the TG) may swing from VEE to VDD.
PAGE 10
Electrical characteristics HCF4051 Figure 6. Waveform 1: channel turned ON (RL = 1 KΩ, f = 1 MHz; 50 % duty cycle) WU QV WI QV 7851 21 7,0( 6 Figure 7.
PAGE 11
HCF4051 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
PAGE 12
Package information 4.1 HCF4051 PDIP-16 (0.25) package information Figure 8. PDIP-16 (0.25) package mechanical drawing 3 & Table 8. PDIP-16 (0.25) package mechanical data Dimensions Symbol mm Min. a1 0.51 B 0.77 Typ. Max. Min. Typ. Max. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 12/15 inch 3.3 0.130 1.27 DocID2053 Rev 3 0.
PAGE 13
HCF4051 4.2 Package information SO-16 package information Figure 9. SO-16 package mechanical drawing 32 + Table 9. SO-16 package mechanical data Dimensions Symbol mm Min. Typ. A a1 inch Max. Min. Typ. 1.75 0.1 0.068 0.2 a2 Max. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.
PAGE 14
Ordering information 5 HCF4051 Ordering information Table 10. Order codes Order code Temperature range Package -55/+125 °C SO-16 HCF4051M013TR Packaging Marking HCF4051 HCF4051YM013TR(1) -40/+125 °C SO16 (automotive version) Tape and reel HCF4051BEY -55/+125 °C PDIP-16 Tube HCF4051Y HCF4051BE 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q002 or equivalent. 6 Revision history Table 11.
PAGE 15
HCF4051 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.