Datasheet

ManualsBrandsST ManualsEmbedded Processors & ControllersHex Inverter HCF40 DIP 55ns

HCC/HCF4069UB

June 1989

HEX INVERTER

DESCRIPTION

.MEDIUM-SPEED OPERATION

–t

PHL

PLH

= 30ns (typ.) AT 10V

.QUIESCENT CURRENT SPECIFIED TO 20V

FOR HCC DEVICE

.STANDARDIZED SYMMETRICAL OUTPUT

CHARACTERISTICS

.5V, 10V, AND 15V PARAMETRIC RATINGS

.INPUT CURRENT OF 100nA AT 18V AND

25°C FOR HCC DEVICE

.100% TESTED FOR QUIESCENT CURRENT

.MEETS ALL REQUIREMENTS OF JEDECTEN-

TATIVESTANDARDN°13A, ”STANDARD SPE-

CIFICATIONS FOR DESCRIPTION OF ”B”

SERIES CMOS DEVICES”

The HCC4069UB (extended temperature range)

and HCF4069UB (intermediate temperature range)

are monolithic integrated circuit, available in14-lead

dual in-line plastic or ceramic package and plastic

micro package.

TheHCC/HCF4069UB consists ofsixCOS/MOS in-

vertercircuits. Thisdeviceis intended forall general-

purpose inverter applications where the

medium-power TTL-drive and logic-level-conver-

sion capabilities ofcircuits suchas HCC/HCF4049B

Hex Inverter/Buffers are not required.

(Plastic Package)

(Ceramic Frit Seal Package)

(Micro Package)

(Plastic Chip Carrier)

ORDERCODES :

HCC4069UBF HCF4069UBM1

HCF4069UBEY HCF4069UBC1

PIN CONNECTIONS

1/12

Summary of content (12 pages)

PAGE 1
HCC/HCF4069UB HEX INVERTER . . . .. .. MEDIUM-SPEED OPERATION – tPHL, tPLH = 30ns (typ.
PAGE 2
HCC/HCF4069UB SCHEMATIC DIAGRAM OF ONE OF SIX IDENTICAL INVERTERS. ABSOLUTE MAXIMUM RATINGS Symbol V DD* Parameter Supply Voltage : HCC Types HC F Types Vi Input Voltage II Value Unit – 0.5 to + 20 – 0.5 to + 18 V V – 0.5 to V DD + 0.
PAGE 3
HCC/HCF4069UB STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL V OH V OL V IH V IL I OH I OL I IH , I IL CI Parameter Quiescent Current VI (V) 5 0.25 HCC 0/10 Types 0/15 10 15 0/20 0/ 5 HCF 0/10 Types 0/15 Output Low Voltage 0.25 0.5 0.01 0.5 15 1 0.01 1 30 20 5 0.02 5 150 5 1 0.01 1 7.5 10 2 0.01 2 15 15 4 0.01 4 30 5 4.95 4.95 4.95 0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 14.95 14.
PAGE 4
HCC/HCF4069UB DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, C L = 50pF, R L = 200kΩ, typical temperature coefficient for all V DD = 0.3%/°C values, all input rise and fall time = 20ns) Symbol Parameter t P L H , t P HL Propagation Delay Time t TL H, t T HL Transition Time Test Conditions Value V D D (V) Min. Typ. Max. 5 55 110 10 30 60 15 25 50 5 100 200 10 50 100 15 40 80 Unit ns ns Minimum and Maximum Voltage Transfer Characteristics.
PAGE 5
HCC/HCF4069UB Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics. Typical Propagation Delay Time vs. Load Capacitance. Typical Propagation Delay Time vs. Load Capacitance. Typical Transition Time vs. Load Capacitance.
PAGE 6
HCC/HCF4069UB Typical Dynamic Power Dissipation/per Inverter vs. Frequency. Variation of Normalized Propagation Delay Time (tPHL and tPLH) with Supply Voltage. APPLICATIONS Typical Crystal Oscillator Circuit. Typical RC Oscillator Circuit. High Input Impedance Amplifier. Input Pulse Shaping Circuit (schmitt trigger).
PAGE 7
HCC/HCF4069UB DYNAMIC ELECTRICAL CHARACTERISTICS AND WAVEFORMS TEST CIRCUITS Quiescent Device Current. Noise Immunity. Input Leakage Current.
PAGE 8
HCC/HCF4069UB Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.
PAGE 9
HCC/HCF4069UB Ceramic DIP14/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7.0 0.276 D E 3.3 0.130 0.38 e3 0.015 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.
PAGE 10
HCC/HCF4069UB SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 e3 0.050 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.
PAGE 11
HCC/HCF4069UB PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.
PAGE 12
HCC/HCF4069UB Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice.