Datasheet

LIS3LV02DL Mechanical and electrical specifications
11/48
NL Non Linearity
Best fit straight line
X, Y axis
Full-scale = ±2 g
ODR=40 Hz
±2
%FS
Best fit straight line
Z axis
Full-scale = ±2 g
ODR=40 Hz
±3
CrAx Cross axis -3.5 3.5 %
V
st
Self test output change
(7),(8)
Full-scale= ±2g
X axis
250 550 900 LSb
Full-scale= ±2 g
Y axis
250 550 900 LSb
Full-scale= ±2 g
Z axis
-100 -350 -600 LSb
Full-scale= ±6 g
X axis
80 180 300 LSb
Full-scale= ±6 g
Y axis
80 180 300 LSb
Full-scale= ±6 g
Z axis
-30 -120 -200 LSb
BW
System Bandwidth
(9)
ODRx/4 Hz
To p
Operating Temperature
Range
-40 +85 °C
Wh Product Weight 72 mgram
1. The product is factory calibrated at 3.3 V. The device can be used from 2.16 V to 3.6 V
2. Typical specifications are not guaranteed
3. Verified by wafer level test and specification of initial offset and sensitivity
4. Zero-g level offset value after MSL3 preconditioning
5. Offset can be eliminated by enabling the built-in high pass filter (HPF)
6. Results of accelerated reliability tests
7. Self Test output changes with the power supply. “Self test output change” is defined as OUTPUT[LSb]
(Self-test bit on
ctrl_reg1=1)
- OUTPUT[LSb]
(Self-test bit on ctrl_reg1=0)
. 1LSb=1g/1024 at 12bit representation, 2g Full-Scale
8. Output data reach 99% of final value after 5/ODR when enabling Self-Test mode due to device filtering
9. ODRx is output data rate. Refer to Table 5 for specifications
Table 3. Mechanical characteristics @ Vdd=3.3 V, T=25 °C unless otherwise noted
(1)
(continued)
Symbol Parameter Test conditions Min.
Typ.
(2)
Max. Unit