Datasheet

LIS3LV02DL Mechanical and electrical specifications
17/48
2.4 Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Note: Supply voltage on any pin should never exceed 6.0 V.
Table 8. Absolute maximum ratings
Symbol Ratings Maximum Value Unit
Vdd Supply voltage -0.3 to 6 V
Vdd_IO I/O pins Supply voltage -0.3 to Vdd +0.1 V
Vin
Input voltage on any control pin
(CS, SCL/SPC, SDA/SDI/SDO, CK)
-0.3 to Vdd_IO +0.3 V
A
POW
Acceleration (Any axis, Powered, Vdd=3.3 V)
3000g for 0.5 ms
10000g for 0.1 ms
A
UNP
Acceleration (any axis, unpowered)
3000g for 0.5 ms
10000g for 0.1 ms
T
OP
Operating temperature range -40 to +85 °C
T
STG
Storage temperature range -40 to +125 °C
ESD Electrostatic discharge protection
4.0 (HBM) kV
200 (MM) V
1.5 (CDM) kV
This is a Mechanical Shock sensitive device, improper handling can cause
permanent damages to the part
This is an ESD sensitive device, improper handling can cause permanent damages
to the part