Datasheet

LIS3LV02DL Register mapping
29/48
Registers marked as Reserved must not be changed. The writing to those registers may
cause permanent damages to the device.
The content of the registers that are loaded at boot should not be changed. They contain the
factory calibration values. Their content is automatically restored when the device is
powered-up.
FF_WU_THS_H rw 0110101 35 00000000
FF_WU_DURATION rw 0110110 36 00000000
0110111 37 Not Used
DD_CFG rw 0111000 38 00000000
DD_SRC rw 0111001 39 00000000
DD_ACK r 0111010 3A dummy Dummy register
0111011 3B Not Used
DD_THSI_L rw 0111100 3C 00000000
DD_THSI_H rw 0111101 3D 00000000
DD_THSE_L rw 0111110 3E 00000000
DD_THSE_H rw 0111111 3F 00000000
1000000-1111111 40-7F Reserved
Table 15. Registers address map (continued)
Register name Type
Register address
Default Comment
Binary Hex