Datasheet

LIS3LV02DL Register description
37/48
In Big Endian Mode (bit BLE in CTRL_REG2 set to ‘1’) the content of this register is the LSB
acceleration data.
7.19 FF_WU_CFG (30h)
Free-fall and inertial wake-up configuration register.
7.20 FF_WU_SRC (31h)
Table 50. Register (30h)
AOI LIR ZHIE ZLIE YHIE YLIE XHIE XLIE
Table 51. Register description (30h)
AOI
And/Or combination of Interrupt events. Default value: 0.
(0: OR combination of interrupt events;
1: AND combination of interrupt events)
LIR
Latch interrupt request. Default value: 0.
(0: interrupt request not latched;
1: interrupt request latched)
ZHIE
Enable Interrupt request on Z High event. Default value: 0.
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
ZLIE
Enable Interrupt request on Z Low event. Default value: 0.
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
YHIE
Enable Interrupt request on Y High event. Default value: 0.
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
YLIE
Enable Interrupt request on Y Low event. Default value: 0.
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
XHIE
Enable Interrupt request on X High event. Default value: 0.
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
XLIE
Enable Interrupt request on X Low event. Default value: 0.
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
Table 52. Register (31h)
X IA ZHZLYHYLXHXL