Datasheet

ManualsBrandsST ManualsAmplifiers & ComparatorsOperational Amplifier, 1.1MHz, 20nA, SOIC

June 2014

DocID2163 Rev 12

1/23

This is information on a product in full production.

www.st.com

LM158, LM258, LM358

Low-power dual operational amplifiers

Datasheet - production data

Features

• Internally frequency-compensated

• Large DC voltage gain: 100 dB

• Wide bandwidth (unity gain): 1.1 MHz

(temperature compensated)

• Very low supply current per channel

essentially independent of supply voltage

• Low input bias current: 20 nA

(temperature compensated)

• Low input offset voltage: 2 mV

• Low input offset current: 2 nA

• Input common-mode voltage range includes

negative rails

• Differential input voltage range equal to the

power supply voltage

• Large output voltage swing 0 V to

-1.5 V)

Summary of content (23 pages)

PAGE 1
LM158, LM258, LM358 Low-power dual operational amplifiers Datasheet - production data • • • DFN8 2x2 (NB) mm • MiniSO8 • Low input offset voltage: 2 mV Low input offset current: 2 nA Input common-mode voltage range includes negative rails Differential input voltage range equal to the power supply voltage Large output voltage swing 0 V to + (VCC -1.
PAGE 2
Contents LM158, LM258, LM358 Contents 1 Schematic diagram.......................................................................... 3 2 Absolute maximum ratings............................................................. 4 3 4 Operating conditions ...................................................................... 5 Electrical characteristics ................................................................ 6 5 Typical applications ................................................................
PAGE 3
LM158, LM258, LM358 1 Schematic diagram Schematic diagram Figure 1: Schematic diagram (1/2 LM158) V CC 6µA 4µA 100µA Q5 Q6 CC Inverting input Q2 Q3 Q1 Q7 Q4 R SC Q11 Non-inverting input Output Q13 Q10 Q8 Q12 Q9 50µA GND DocID2163 Rev 12 3/23
PAGE 4
LM158, LM258, LM358 Absolute maximum ratings 2 Absolute maximum ratings Table 1: Absolute maximum ratings Symbol VCC Parameter Supply voltage Input voltage Vid Differential input voltage V Infinite (2) 5 mA in DC or 50 mA in AC (duty cycle = 10 %, T = 1 s) Operating free-air temperature range Tstg Storage temperature range Maximum junction temperature Rthja Thermal resistance junction to (3) ambient Thermal resistance junction to (3) case HBM: human body model MM: machine model -55 to 125
PAGE 5
LM158, LM258, LM358 3 Operating conditions Operating conditions Table 2: Operating conditions Symbol VCC Parameter Supply voltage Common mode input voltage range Toper Operating free air temperature range Unit 3 to 30 V VCC -0.3 (1) Vicm Value to + VCC LM158 -55 to +125 LM258 -40 to +105 LM358 0 to +70 -1.5 °C Notes: (1) When used in comparator, the functionality is guaranteed as long as at least one input remains within the operating common mode voltage range.
PAGE 6
LM158, LM258, LM358 Electrical characteristics 4 Electrical characteristics Table 3: Electrical characteristics for VCC+ = +5 V, VCC- = Ground, Vo = 1.4 V, Tamb = +25 °C (unless otherwise specified) Symbol Vio Parameter Input offset voltage (1) Min. Typ.
PAGE 7
LM158, LM258, LM358 Electrical characteristics Symbol Parameter Isink Output sink current VOH Min. Typ. = +15 V, Vo = +2 V, Vid = -1 V 10 20 mA = +15 V, Vo = +0.2 V, Vid = -1V 12 50 µA RL = 2 kΩ, VCC = 30 V 26 27 V Tmin ≤ Tamb ≤ Tmax 26 + VCC + VCC + High level output voltage RL = 10 kΩ, + VCC = 30 V 27 Tmin ≤ Τamb ≤ Tmax VOL 27 5 20 Tmin ≤ Tamb ≤ Tmax SR + + 0.3 0.6 V/µs 0.7 1.1 MHz 0.
PAGE 8
LM158, LM258, LM358 Electrical characteristics 500 4 RL 2 kΩ VCC = +15 V 3 2 1 0 INPUT VOLTAGE (V) Figure 5: Voltage follower pulse response with VCC = 30 V OUTPUT VOLTAGE (mV) OUTPUT VOLTAGE (V) Figure 4: Voltage follower pulse response with VCC = 15 V 3 2 eO - eI 50 pF 400 Input 350 Output 300 Tamb = +25°C VCC = 30 V 1 0 10 20 30 40 250 0 TIME (μs) 8/23 + 450 1 2 3 4 5 6 7 TIME (μs) Figure 6: Input current Figure 7: Output voltage vs sink current Figure 8: Output voltage
PAGE 9
LM158, LM258, LM358 Electrical characteristics Figure 10: Input voltage range Figure 11: Open-loop gain VOLTAGE GAIN (dB) 160 RL = 20 kΩ 120 RL = 2 kΩ 80 40 0 10 20 30 40 POSITIVE SUPPLY VOLTAGE (V) Figure 12: Supply current Figure 13: Input current Figure 14: Gain bandwidth product Figure 15: Power supply rejection ratio DocID2163 Rev 12 9/23
PAGE 10
LM158, LM258, LM358 Electrical characteristics Figure 16: Common-mode rejection ratio Figure 17: Phase margin vs. capacitive load Phase margin at Vcc = 15 V andVicm = 7.5 V vs.
PAGE 11
LM158, LM258, LM358 5 Typical applications Typical applications Single supply voltage VCC = +5 VDC.
PAGE 12
LM158, LM258, LM358 Typical applications Figure 22: High input Z, DC differential amplifier Figure 23: High input Z adjustable gain DC instrumentation amplifier Figure 24: Using symmetrical amplifiers to reduce input current Figure 25: Low drift peak detector µ µ µ Ω Ω Ω 12/23 DocID2163 Rev 12 Ω
PAGE 13
LM158, LM258, LM358 Typical applications Figure 26: Active band-pass filter R1 100k C1 330pF +V1 R2 100k 1/2 LM158 R5 470k R4 10M 1/2 LM158 R3 100k C2 330 pF R6 470k Vo R7 100k 1/2 LM158 R8 100k DocID2163 Rev 12 C3 10 F VCC 13/23
PAGE 14
LM158, LM258, LM358 Package information 6 Package information In order to meet environmental requirements, ST offers these devices in different grades of ® ® ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ® ECOPACK is an ST trademark.
PAGE 15
LM158, LM258, LM358 6.1 Package information SO8 package information Figure 27: SO8 package mechanical drawing Table 4: SO8 package mechanical data Ref. Dimensions Millimeters Min. Typ. A Inches Max. Min. Typ. 1.75 0.069 A1 0.10 A2 1.25 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 0.25 Max. 0.004 0.010 0.049 1.27 0.050 h 0.25 0.50 0.010 0.
PAGE 16
LM158, LM258, LM358 Package information 6.2 MiniSO8 package information Figure 28: MiniSO8 package mechanical drawing Table 5: MiniSO8 package mechanical data Ref. Dimensions Millimeters Min. Typ. A A1 Max. Min. Typ. 1.1 0 0.15 0.043 0 0.006 0.75 0.95 0.030 b 0.22 0.40 0.009 0.016 c 0.08 0.23 0.003 0.009 D 2.80 3.00 3.20 0.11 0.118 0.126 E 4.65 4.90 5.15 0.183 0.193 0.203 E1 2.80 3.00 3.10 0.11 0.118 0.122 L 0.85 Max. A2 e 0.65 0.40 0.60 0.033 0.
PAGE 17
LM158, LM258, LM358 6.3 Package information DFN8 2 x 2 (NB) package information Figure 29: DFN8 2 x 2 (NB) package mechanical drawing Table 6: DFN8 2 x 2 x 0.6 (NB) mm package mechanical data (pitch 0.5 mm) Ref. Dimensions Millimeters A Inches Min. Typ. Max. Min. Typ. Max. 0.51 0.55 0.60 0.020 0.022 0.024 A1 0.05 A3 0.002 0.15 0.006 b 0.18 0.25 0.30 0.007 0.010 0.012 D 1.85 2.00 2.15 0.073 0.079 0.085 D2 1.45 1.60 1.70 0.057 0.063 0.067 E 1.85 2.00 2.15 0.
PAGE 18
LM158, LM258, LM358 Package information Figure 30: DFN8 2 x 2 (NB) footprint recommendation 18/23 DocID2163 Rev 12
PAGE 19
LM158, LM258, LM358 6.4 Package information TSSOP8 package information Figure 31: TSSOP8 package mechanical drawing Table 7: TSSOP8 package mechanical data Ref. Dimensions Millimeters Min. Typ. A Inches Max. Min. Typ. 1.2 A1 0.05 A2 0.80 b Max. 0.047 0.15 0.002 1.05 0.031 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 2.90 3.00 3.10 0.114 0.118 0.122 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 1.00 0.65 k 0° L 0.45 0.
PAGE 20
LM158, LM258, LM358 Ordering information 7 Ordering information Table 8: Order codes Order code LM158QT Temperature range Package Packaging Marking -55 °C, +125 °C DFN8 2x2 (NB) Tape and reel K4A LM158DT SO8 158 SO8 258A SO8 Automotive grade 258AY SO8 258 LM258APT TSSOP8 258A LM258AST LM258ST MiniSO8 K408 K416 LM258QT DFN8 2x2 (NB) K4C SO8 358 LM358YDT SO8 Automotive grade 358Y LM358ADT SO8 358A LM358PT LM358APT TSSOP8 358 358A TSSOP8 Automotive grade 358Y 358AY LM
PAGE 21
LM158, LM258, LM358 8 Revision history Revision history Table 9: Document revision history Date Revision Changes 01-Jul- 2003 1 First release. 02-Jan-2005 2 Rthja and Tj parameters added in AMR Table 1: "Absolute maximum ratings". 01-Jul-2005 3 ESD protection inserted in Table 1: "Absolute maximum ratings". 05-Oct-2006 4 Added Figure 17: Phase margin vs. capacitive load. 30-Nov-2006 5 Added missing ordering information.
PAGE 22
LM158, LM258, LM358 Revision history Date Revision 20-Jun-2014 12 Changes Removed DIP8 package Corrected typos (W replaced with Ω, £ replaced with ≤) Updated Features Added Related products Table 3: replaced DVio with ΔVio/ΔT and DIio with ΔIio/ΔT. Updated Table 7 for exposed pad dimensions Table 8: "Order codes": removed order codes LM258YPT and LM258AYPT; removed all order codes for devices with tube packing; added package code (NB) to DFN8 2x2 package.
PAGE 23
LM158, LM258, LM358 Please Read Carefully Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.