Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsIGBT, 600V, 20A, TO-220

June 2017

DocID11423 Rev 7

1/30

This is information on a product in full production.

www.st.com

STGB10NC60KDT4, STGD10NC60KDT4,

STGF10NC60KD, STGP10NC60KD

10 A, 600 V short-circuit rugged IGBT

Datasheet - production data

Figure 1: Internal schematic diagram

Features

 Lower on voltage drop (V

CE(sat)

)

 Lower C

RES

/ C

IES

ratio (no cross-conduction

susceptibility)

 Very soft ultra fast recovery antiparallel

diode

 Short-circuit withstand time 10 μs

Applications

 High frequency motor controls

 SMPS and PFC in both hard switch and

resonant topologies

 Motor drives

Description

These devices are very fast IGBTs developed

using advanced PowerMESH™ technology. This

process guarantees an excellent trade-off

between switching performance and low on-state

behavior. These devices are well-suited for

resonant or soft-switching applications.

Table 1: Device summary

Order code

Marking

Package

Packing

STGB10NC60KDT4

GB10NC60KD

D²PAK

Tape and reel

STGD10NC60KDT4

GD10NC60KD

DPAK

STGF10NC60KD

GF10NC60KD

TO-220FP

Tube

STGP10NC60KD

GP10NC60KD

TO-220

Summary of content (30 pages)

PAGE 1
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 10 A, 600 V short-circuit rugged IGBT Datasheet - production data Features     Lower on voltage drop (VCE(sat)) Lower CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode Short-circuit withstand time 10 μs Applications    High frequency motor controls SMPS and PFC in both hard switch and resonant topologies Motor drives Figure 1: Internal schematic diagram Description These devices are
PAGE 2
Contents STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Contents 1 Electrical ratings ............................................................................. 3 2 Electrical characteristics ................................................................ 4 2.1 Electrical characteristics (curves) ...................................................... 7 3 Test circuits ................................................................................... 10 4 Package information ......
PAGE 3
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 1 Electrical ratings Electrical ratings Table 2: Absolute maximum ratings Value Symbo l VCES Parameter Unit D²PAK, TO-220 DPAK Collector-emitter voltage (VGE = 0 V) IC(1) TO-220FP 600 V Continuous collector current at TC = 25 °C 20 9 A Continuous collector current at TC = 100 °C 10 6 A (2) Turn-off latching current 30 A ICP(3) Pulsed collector current 30 A VGE Gate-emitter voltage ±20 V Diode RMS forward current at T
PAGE 4
Electrical characteristics 2 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Electrical characteristics TC = 25 °C unless otherwise specified Table 4: Static characteristics Symbol Parameter Test conditions V(BR)CES Collector-emitter breakdown voltage VCE(sat) Collector-emitter saturation voltage VGE(th) Gate threshold voltage ICES Collector cut-off current IGES Gate-emitter leakage current VGE = ±20 V gfs(2) Forward transconductance VCE = 15 V, IC= 5 A IC = 1 mA, VGE = 0 V M
PAGE 5
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Electrical characteristics Table 6: Switching on/off (inductive load) Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope tr(Voff) Off voltage rise time td(off) Turn-off delay time tf Current fall time tr(Voff) Off voltage rise time td(off) Turn-off delay time tf Test conditions Current fall time Min. Typ.
PAGE 6
Electrical characteristics STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Table 8: Collector-emitter diode Symbol 6/30 Parameter VF Forward on-voltage Test conditions trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current Min. Typ. Max. Unit IF=5 A - 2 - V IF=5 A, Tj=125 °C - 1.6 - V - 22 - ns - 14 - nC - 1.
PAGE 7
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 2.
PAGE 8
Electrical characteristics STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Figure 8: Normalized gate threshold voltage vs temperature Figure 9: Collector-emitter on voltage vs collector current Figure 10: Normalized breakdown voltage vs temperature Figure 11: Switching energy vs temperature Figure 12: Switching energy vs gate resistance 8/30 Figure 13: Switching energy vs collector current DocID11423 Rev 7
PAGE 9
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Electrical characteristics Figure 14: Thermal impedance for D²PAK, DPAK and TO-220 Figure 15: Turn-off SOA Figure 16: Emitter-collector diode characteristics Figure 17: Thermal impedance for TO-220FP DocID11423 Rev 7 9/30
PAGE 10
Test circuits 3 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Test circuits Figure 18: Test circuit for inductive load switching C A Figure 19: Gate charge test circuit A L=100 µH G E B B 3.3 µF C G + RG VCC 1000 µF D.U.
PAGE 11
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 4.
PAGE 12
Package information STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Table 9: D²PAK (TO-263) type A package mechanical data mm Dim. Min. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 7.75 8.00 D2 1.10 1.30 1.50 E 10.00 E1 8.50 8.70 8.90 E2 6.85 7.05 7.25 e 10.40 2.54 e1 4.88 5.28 H 15.00 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 12/30 Typ. 0.
PAGE 13
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Figure 23: D²PAK (TO-263) type A recommended footprint (dimensions are in mm) DocID11423 Rev 7 13/30
PAGE 14
Package information 4.
PAGE 15
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Table 10: D²PAK (TO-263) type B mechanical data mm Dim. Min. Typ. Max. A 4.36 4.56 A1 0 0.25 b 0.70 0.90 b1 0.51 0.89 b2 1.17 1.37 b3 1.36 1.46 c 0.38 0.694 c1 0.38 0.534 c2 1.19 1.34 D 8.60 9.00 D1 6.90 7.50 E 10.15 10.55 E1 8.10 e 8.70 2.54 BSC H 15.00 15.60 L 1.90 2.50 L1 1.65 L2 1.78 L3 L4 0.25 4.78 DocID11423 Rev 7 5.
PAGE 16
Package information STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Figure 25: D²PAK (TO-263) type B recommended footprint (dimensions are in mm) 16/30 DocID11423 Rev 7
PAGE 17
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 4.
PAGE 18
Package information STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Table 11: DPAK (TO-252) type A mechanical data mm Dim. Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.16 2.28 2.40 e1 4.40 4.60 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 18/30 Typ. 5.10 5.25 6.60 1.00 0.
PAGE 19
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Figure 27: DPAK (TO-252) type A recommended footprint (dimensions are in mm) DocID11423 Rev 7 19/30
PAGE 20
Package information 4.
PAGE 21
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Table 12: TO-220FP package mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.
PAGE 22
Package information 4.
PAGE 23
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Table 13: TO-220 type A package mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 D1 15.75 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.
PAGE 24
Package information 4.
PAGE 25
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Figure 31: D2PAK type A reel outline Table 14: D²PAK type A tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. Min. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 Max. 330 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base quantity 1000 P2 1.9 2.1 Bulk quantity 1000 R 50 T 0.25 0.35 W 23.7 24.
PAGE 26
Package information 4.
PAGE 27
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Table 15: D²PAK type B reel mechanical data mm Dim. Min. A 330 B 1.5 C 12.8 D 20.2 G 24.4 N 100 T 4.8 Max. 13.2 26.4 30.
PAGE 28
Package information STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Figure 35: DPAK (TO-252) reel outline Table 16: DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 28/30 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.
PAGE 29
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 5 Revision history Revision history Table 17: Document revision history Date Revision Changes 14-Jun-2005 1 First release. 19-Jul-2005 2 Complete version. 27-Jan-2006 3 Inserted ecopack indication. 01-Mar-2006 4 The document has been reformatted. 08-Feb-2007 5 Modified value on Table 6.: Switching on/off (inductive load). 24-Nov-2009 6 Inserted DPAK package option. 06-Jun-2017 7 Modified part numbers on cover page.
PAGE 30
STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders.