Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsMOSFET, N-Channel, 100V, 40A, 150W, TO-220AB

January 2007 Rev 3 1/12

STP40NF10L

N-channel 100V - 0.028Ω - 40A TO-220

Low gate charge STripFET™ Power MOSFET

General features

■ Exceptional dv/dt capability

■ 100% avalanche tested

■ Application oriented characterization

Description

This Power MOSFET series realized with

STMicroelectronics unique STripFET process has

specifically been designed to minimize input

capacitance and gate charge. It is therefore

suitable as primary switch in advanced high-

efficiency isolated DC-DC converters for Telecom

and Computer application. It is also intended for

any application with low gate charge drive

requirements.

Applications

■ Switching application

Internal schematic diagram

Type V

DSS

DS(on)

STP40NF10L 100V <0.033Ω 40A

TO-220

www.st.com

Order codes

Part number Marking Package Packaging

STP40NF10L P40NF10L TO-220 Tube

Summary of content (12 pages)

PAGE 1
STP40NF10L N-channel 100V - 0.028Ω - 40A TO-220 Low gate charge STripFET™ Power MOSFET General features Type VDSS RDS(on) ID STP40NF10L 100V <0.033Ω 40A ■ Exceptional dv/dt capability ■ 100% avalanche tested ■ Application oriented characterization 3 1 Description 2 TO-220 This Power MOSFET series realized with STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge.
PAGE 2
Contents STP40NF10L Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
STP40NF10L 1 Electrical ratings Electrical ratings Table 1.
PAGE 4
Electrical characteristics 2 STP40NF10L Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. On/off states Symbol Parameter V(BR)DSS Drain-source Breakdown voltage Test conditions ID = 250 µA, VGS = 0 100 Unit V µA VDS=Max rating, TC=125°C 10 µA ±100 nA 1.7 2.5 V 0.028 0.030 0.033 0.
PAGE 5
STP40NF10L Electrical characteristics Table 6. Symbol ISD Source drain diode Parameter Test conditions Min. Typ. Max Unit Source-drain current 40 A ISDM (1) Source-drain current (pulsed) 160 A VSD (2) Forward on voltage ISD = 40A, VGS = 0 1.3 V Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 40A, VDD = 30V di/dt = 100A/µs, Tj = 150°C (see Figure 15) trr Qrr IRRM 110 467 8 ns nC A 1. Pulse width limited by safe operating area. 2.
PAGE 6
Electrical characteristics STP40NF10L 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6.
PAGE 7
STP40NF10L Electrical characteristics Figure 7. Gate charge vs. gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs. temperature Figure 11. Source-drain diode forward characteristics Capacitance variations Figure 10. Normalized on resistance vs. temperature Figure 12. Normalized breakdown voltage vs.
PAGE 8
Test circuit 3 STP40NF10L Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/12 Figure 18.
PAGE 9
STP40NF10L 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
PAGE 10
Package mechanical data STP40NF10L TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 10/12 TYP 0.154 0.
PAGE 11
STP40NF10L 5 Revision history Revision history Table 7. Revision history Date Revision Changes 09-Sep-2004 1 First version. 17-Aug-2006 2 The document has been reformatted. 31-Jan-2007 3 Typo mistake on Table 1.
PAGE 12
STP40NF10L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.