Datasheet

ManualsBrandsST ManualsDiodesRectifier Diode 12A 600V TO-220ACINS

February 2010 Doc ID 7973 Rev 4 1/11

STTH12R06

Turbo 2 ultrafast high voltage rectifier

Features

■ Ultrafast switching

■ Low reverse recovery current

■ Low thermal resistance

■ Reduces switching losses

■ Package insulation voltage:

TO220AC ins: 2500 V

RMS

TO-220FPAC: 2000 V

Description

The STTH12R06 uses ST Turbo 2 600V

technology and is specially suited as a boost

diode in continuous mode power factor

corrections and hard switching conditions.

This device is also intended for use as a free

wheeling diode in power supplies and other power

switching applications.

Table 1. Device summary

Symbol Value

F(AV)

12 A

RRM

600 V

(typ) 7 A

175 °C

(typ) 1.4 V

(max) 25 ns

TO-220AC

STTH12R06D

TO-220FPAC

STTH12R06FP

PAK

STTH12R06G

TO-220AC insulated

STTH12R06DIRG

www.st.com

Summary of content (11 pages)

PAGE 1
STTH12R06 Turbo 2 ultrafast high voltage rectifier Features ■ Ultrafast switching ■ Low reverse recovery current ■ Low thermal resistance ■ Reduces switching losses ■ Package insulation voltage: TO220AC ins: 2500 VRMS TO-220FPAC: 2000 VDC K K A A TO-220AC STTH12R06D K TO-220FPAC STTH12R06FP Description K The STTH12R06 uses ST Turbo 2 600V technology and is specially suited as a boost diode in continuous mode power factor corrections and hard switching conditions.
PAGE 2
Characteristics STTH12R06 1 Characteristics Table 2. Absolute ratings (limiting values) Symbol VRRM Parameter Repetitive peak reverse voltage TO-220AC / TO-220FPAC / IF(RMS) IF(AV) Average forward current δ = 0.5 Tc = 125 °C TO-220FPAC Tc = 50 °C TO-220AC ins. Tc = 80 °C A 100 A -65 to + 175 °C 175 °C Value (max) Unit tp = 10 ms sinusoidal Thermal resistance Parameter Junction to case TO-220AC / D2PAK 1.7 TO-220FPAC 4.4 TO-220AC ins. 3.
PAGE 3
STTH12R06 Table 5. Characteristics Dynamic Characteristics Symbol Parameter Test conditions Min. Typ. Max. IF = 0.5 A, Irr = 0.25 A, IR = 1 A Reverse recovery time trr Tj = 25 °C 25 ns IF = 1 A, dIF/dt = -50 A/µs, VR = 30 V 45 Reverse recovery current IRM 7.0 S factor Softness factor Qrr Reverse recovery charges tfr Forward recovery time Figure 1. 8.4 0.2 nC IF = 12 A, dIF/dt = 96 A/µs, VFR = 1.1 x VFmax Conduction losses versus average current Figure 2. P(W) 200 ns 5.
PAGE 4
Characteristics Figure 5. STTH12R06 Peak reverse recovery current versus dIF/dt (typical values) Figure 6. IRM(A) Reverse recovery time versus dIF/dt (typical values) trr(ns) 26 80 VR=400V Tj=125°C 24 IF=2 x IF(AV) 20 IF=IF(AV) 18 VR=400V Tj=125°C 70 22 60 IF=2 x IF(AV) IF=0.5 x IF(AV) IF=IF(AV) 50 16 IF=0.5 x IF(AV) IF=0.25 x IF(AV) 14 40 12 10 30 8 20 6 4 10 2 dIF/dt(A/µs) dIF/dt(A/µs) 0 0 0 200 Figure 7.
PAGE 5
STTH12R06 Characteristics Figure 11. Forward recovery time versus dIF/dt (typical values) Figure 12. Junction capacitance versus reverse voltage applied (typical values) tfr(ns) C(pF) 180 100 IF=IF(AV) VFR=1.1 x VF max. Tj=125°C 160 F=1MHz VOSC=30mVRMS Tj=25°C 140 120 100 80 60 40 20 VR(V) dIF/dt(A/µs) 10 0 0 100 200 300 400 1 500 10 100 1000 Figure 13.
PAGE 6
Package information 2 STTH12R06 Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.4 to 0.6 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. TO-220AC dimensions Dimensions Ref. Inches Min.
PAGE 7
STTH12R06 Package information Table 7. TO-220FPAC dimensions Dimensions Ref. A B H Dia L6 L2 L7 Millimeters Inches Min. Max. Min. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L3 L5 F1 D L2 L4 F E G1 G Doc ID 7973 Rev 4 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 L4 9.
PAGE 8
Package information Table 8. STTH12R06 TO-220AC (nins. and ins. 20-up) dimensions Dimensions Ref. Millimeters Min. A ØI 15.20 a1 C B b2 L Typ. Max. Inches Min. Typ. 15.90 0.598 3.75 Max. 0.625 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 4.80 5.40 0.189 0.212 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.
PAGE 9
STTH12R06 Package information Table 9. D2PAK dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.40 1.75 0.055 0.069 M 2.
PAGE 10
Ordering information 3 STTH12R06 Ordering information Table 10. Ordering information Order code Marking Package Weight Base qty Delivery mode STTH12R06D STTH12R06D TO-220AC 1.90 g 50 Tube PAK 1.48 g 50 Tube STTH12R06G D2 STTH12R06G-TR STTH12R06G 2 D PAK 1.48 g 1000 Tape and reel STTH12R06FP STTH12R06FP TO-220FPAC 1.70 g 50 Tube STTH12R06DIRG STTH12R06DI TO-220AC ins. 1.86 g 50 Tube STTH12R06G 4 Revision history Table 11.
PAGE 11
STTH12R06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.