Datasheet

ManualsBrandsST ManualsDiodesRectifier Diode 1A 600V DO-214AC, SMA

October 2009 Doc ID 8321 Rev 4 1/9

STTH1L06

Turbo 2 ultrafast high voltage rectifier

Features

■ Ultrafast switching

■ Low reverse recovery current

■ Reduces switching and conduction losses

■ Low thermal resistance

Description

The STTH1L06/U/A, which is using ST Turbo 2

600 V technology, is specially suited as boost

diode in discontinuous or critical mode power

factor corrections.

The device is also intended for use as a free

wheeling diode in power supplies and other power

switching applications.

Table 1. Device summary

Symbol Value

F(AV)

1 A

RRM

600 V

(max) 75 µA

(max) 175 °C

(max) 1.05 V

(max) 80 ns

DO-41

STTH1L06

SMB

STTH1L06U

SMA

STTH1L06A

www.st.com

Summary of content (9 pages)

PAGE 1
STTH1L06 Turbo 2 ultrafast high voltage rectifier Features ■ Ultrafast switching ■ Low reverse recovery current ■ Reduces switching and conduction losses ■ Low thermal resistance The STTH1L06/U/A, which is using ST Turbo 2 600 V technology, is specially suited as boost diode in discontinuous or critical mode power factor corrections. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications. SMA STTH1L06A Table 1.
PAGE 2
Characteristics STTH1L06 1 Characteristics Table 2. Absolute ratings (limiting values) Symbol Parameter VRRM Repetitive peak reverse voltage IF(RMS) Forward rms voltage IF(AV) 7 A Average forward current δ = 0.
PAGE 3
STTH1L06 Characteristics Table 5. Dynamic characteristics Symbol Parameter trr Reverse recovery time Tj = 25 °C IF = 1 A, dIF/dt = -50, A/µs, VR = 30 V tfr Forward recovery time Tj = 25 °C Forward recovery voltage Tj = 25 °C VFP Figure 1. Test conditions Typ. Max. Unit 55 80 ns IF = 1 A, dIF/dt = 100 A/µs VFR = 3.5 V 50 ns IF = 1 A, dIF/dt = 100 A/µs 10 V Conduction losses versus average current Min. Figure 2. Forward voltage drop versus forward current IFM(A) P(W) 1.
PAGE 4
Characteristics Figure 5. STTH1L06 Relative variation of thermal Figure 6. impedance junction ambient versus pulse duration (epoxy FR4) Peak reverse recovery current versus dIF/dt (90% confidence) IRM(A) Zth(j-a)/Rth(j-a) 1.0 2.5 SMA 0.9 VR=400V Tj=125°C 2.3 0.8 2.0 0.7 1.8 IF=2 x IF(av) IF=IF(av) IF=0.5 x IF(av) 0.6 1.5 δ = 0.5 0.5 1.3 0.4 1.0 δ = 0.2 0.3 0.8 T δ = 0.1 0.2 IF=0.25 x IF(av) 0.1 tp(s) Single pulse 1.E+00 Figure 7. 0.3 δ=tp/T 0.0 1.E-01 0.5 1.
PAGE 5
STTH1L06 Characteristics Figure 11. Transient peak forward voltage versus dIF/dt (90% confidence) Figure 12. Forward recovery time versus dIF/dt (90% confidence) VFP(V) tfr(ns) 200 25 IF=IF(av) Tj=125°C IF=IF(av) VFR=1.1 x VF max. Tj=125°C 180 160 20 140 120 15 100 80 10 60 40 5 20 dIF/dt(A/µs) dIF/dt(A/µs) 0 0 0 20 40 60 80 100 120 140 160 180 0 200 Figure 13.
PAGE 6
Package information 2 STTH1L06 Package information ● Epoxy meets UL 94, V0 ● Band indicates cathode ● Bending method (DO-41): see Application note AN1471 In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. SMA dimensions Dimensions Ref.
PAGE 7
STTH1L06 Package information Table 7. SMB dimensions Dimensions Ref. Millimeters Inches E1 D E A1 A2 C L b Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 1.95 2.20 0.077 0.087 c 0.15 0.40 0.006 0.016 D 3.30 3.95 0.130 0.156 E 5.10 5.60 0.201 0.220 E1 4.05 4.60 0.159 0.181 L 0.75 1.50 0.030 0.059 Figure 17. Footprint (dimensions in mm) 1.62 2.60 1.62 2.18 5.84 Table 8. DO-41 (plastic) dimensions Dimensions Ref.
PAGE 8
Ordering information 3 Ordering information Table 9. 4 Ordering information Order code Marking Package Weight Base qty Delivery mode STTH1L06 STTH1L06 DO-41 0.34 g 2000 Ammopack STTH1L06RL STTH1L06 DO-41 0.34 g 5000 Tape and reel STTH1L06U BL6 SMB 0.11 g 2500 Tape and reel STTH1L06A HL6 SMA 0.068 g 5000 Tape and reel Revision history Table 10. 8/9 STTH1L06 Document revision history Date Revision Jul-2002 3C 30-Sep-2009 4 Changes Last issue.
PAGE 9
STTH1L06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.