Datasheet

ManualsBrandsST ManualsDiodesRectifier Diode 30A 1kV DO-247

March 2006 Rev 1 1/10

STTH3010

Ultrafast recovery - high voltage diode

Main product characteristics

Features and benefits

■ Ultrafast, soft recovery

■ Very low conduction and switching losses

■ High frequency and/or high pulsed current

operation

■ High reverse voltage capability

■ High junction temperature

■ Insulated package:

–DOP3I

Electrical insulation = 2500 V

RMS

Capacitance = 12 pF

Description

The high quality design of this diode has

produced a device with low leakage current,

regularly reproducible characteristics and intrinsic

ruggedness. These characteristics make it ideal

for heavy duty applications that demand long term

reliability.

Such demanding applications include industrial

power supplies, motor control, and similar

mission-critical systems that require rectification

and freewheeling. These diodes also fit into

auxiliary functions such as snubber, bootstrap,

and demagnetization applications.

The improved performance in low leakage

current, and therefore thermal runaway guard

band, is an immediate competitive advantage for

this device.

Order codes

F(AV)

30 A

RRM

1000 V

175° C

(typ) 1.30 V

(typ) 42 ns

Part Number Marking

STTH3010D STTH3010D

STTH3010W STTH3010W

STTH3010PI STTH3010PI

TO-220AC

STTH3010D

DO-247

STTH3010W

DOP3I

STTH3010PI

www.st.com

Summary of content (10 pages)

PAGE 1
STTH3010 Ultrafast recovery - high voltage diode Main product characteristics IF(AV) 30 A VRRM 1000 V Tj 175° C VF (typ) 1.
PAGE 2
Characteristics STTH3010 1 Characteristics Table 1. Absolute ratings (limiting values at 25° C, unless otherwise specified) Symbol Parameter VRRM Repetitive peak reverse voltage IF(RMS) RMS forward current TO-220 / DO-247 Tc = 105° C DOP3I Tc = 65° C IF(AV) Average forward current, δ = 0.5 IFRM Repetitive peak forward current IFSM Surge non repetitive forward current tp = 10 ms Sinusoidal Tstg Storage temperature range Tj Table 2.
PAGE 3
STTH3010 Characteristics Table 4. Dynamic characteristics Symbol Parameter Test conditions Min. Typ Max.
PAGE 4
Characteristics Figure 5. STTH3010 Reverse recovery time versus dIF/dt (typical values) Figure 6. Reverse recovery charges versus dIF/dt (typical values) Qrr(µC) trr(ns) 7 700 VR=600V Tj=125°C 600 IF= 2 x IF(AV) 500 VR=600V Tj=125°C 6 IF= 2 x IF(AV) 5 IF= IF(AV) 400 4 IF= IF(AV ) 300 3 200 2 IF=0.5 x IF(AV) 100 1 IF=0.5 x IF(AV) dIF/dt(A/µs) dIF/dt(A/µs) 0 0 0 50 Figure 7.
PAGE 5
STTH3010 Figure 9. Characteristics Transient peak forward voltage versus dIF/dt (typical values) Figure 10. Forward recovery time versus dIF/dt (typical values) VFP(V) tfr(ns) 25 800 IF = IF(AV) Tj=125°C IF = IF(AV) VFR = 1.5 x V F max. Tj=125°C 700 20 600 15 500 10 400 5 300 dIF/dt(A/µs) 0 dIF/dt(A/µs) 200 0 100 200 300 400 500 0 100 200 300 400 500 Figure 11.
PAGE 6
Package information 2 STTH3010 Package information Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.55 Nm (TO-220AC) Recommended torque value: 0.80 Nm (SOD93, DOP31, and DO-247) Maximum torque value: 0.7 Nm (TO-220AC) Maximum torque value: 1.0 Nm (SOD93, DOP31, and DO-247) Table 5. DO-247 dimensions DIMENSIONS REF. V Dia V Millimeters Inches Min. Max Min. Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.
PAGE 7
STTH3010 Package information Table 6. T0-220AC dimensions DIMENSIONS REF. A H2 ØI C L5 L7 L6 L2 F1 Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 D L9 L4 L2 16.40 typ. 0.645 typ. F M E G L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.
PAGE 8
Package information STTH3010 Table 7. DOP3I dimensions DIMENSIONS REF. E E1 c ØP G Y D L c1 b Q e Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 b 1.20 1.40 0.047 0.055 c 1.45 1.55 0.057 0.061 c1 0.50 0.70 0.020 0.028 D 12.15 13.10 0.474 0.516 E 15.10 15.50 0.594 0.610 E1 7.55 7.75 0.297 0.305 e 10.80 11.30 0.425 0.445 G 20.4 21.10 0.815 0.831 L 14.35 15.60 0.565 0.614 P 4.08 4.17 0.161 0.164 Q 2.70 2.90 0.106 0.
PAGE 9
STTH3010 3 4 Ordering information Ordering information Part Number Marking Package Weight Base qty Delivery mode STTH3010D STTH3010D TO-220AC 1.86 g 50 Tube STTH3010PI STTH3010PI DOP3I 4.46 g 30 Tube STTH3010W STTH3010W DO-247 4.4 g 30 Tube Revision history Date Revision 02-Mar-2006 1 Description of Changes First issue.
PAGE 10
STTH3010 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.