Datasheet

ManualsBrandsST ManualsDiodesRectifier Diode 3A 600V DO-201AD

1/9

Table 1: Main Product Characteristics

F(AV)

3 A

RRM

600 V

(max)

100 µA

175°C

(typ)

1.0 V

(typ)

35 ns

STTH3R06

TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER

SMB

STTH3R06U

SMC

STTH3R06S

DO-201AD

STTH3R06

September 2005 REV. 3

FEATURES AND BENEFITS

■ Ultrafast switching

■ Low forward voltage drop

■ Low thermal resistance

■ Low leakage current (platinium doping)

DESCRIPTION

The STTH3R06, which is using ST Turbo 2 600V

technology, is specially suited for use in switching

power supplies, inverters and as a free wheeling

diode.

Table 2: Order Codes

Part Number Marking

STTH3R06 STTH3R06

STTH3R06RL STTH3R06

STTH3R06U 3R6U

STTH3R06S R6S

Summary of content (9 pages)

PAGE 1
STTH3R06 ® TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER Table 1: Main Product Characteristics IF(AV) 3A VRRM 600 V IR (max) 100 µA Tj 175°C VF (typ) 1.0 V trr (typ) 35 ns A FEATURES AND BENEFITS ■ ■ ■ ■ K DO-201AD STTH3R06 Ultrafast switching Low forward voltage drop Low thermal resistance Low leakage current (platinium doping) DESCRIPTION The STTH3R06, which is using ST Turbo 2 600V technology, is specially suited for use in switching power supplies, inverters and as a free wheeling diode.
PAGE 2
STTH3R06 Table 3: Absolute Ratings (limiting values) Symbol VRRM IF(RMS) IF(AV) IFSM Parameter Value Unit Repetitive peak reverse voltage 600 V RMS forward current 10 A 3 A 55 A Average forward current δ = 0.
PAGE 3
STTH3R06 Figure 1: Conduction losses versus average current Figure 2: Forward voltage drop versus forward current IFM(A) P(W) 50 5.0 δ = 0.1 δ = 0.2 δ = 0.05 4.5 δ = 0.5 45 4.0 3.5 35 3.0 30 2.5 25 2.0 20 1.5 Tj=150°C (maximum values) 40 δ=1 Tj=150°C (typical values) Tj=25°C (maximum values) 15 T 1.0 10 0.5 δ=tp/T IF(AV)(A) 5 tp 0.0 VFM(V) 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.
PAGE 4
STTH3R06 Figure 7: Softness factor versus dIF/dt (typical values) S factor 1.0 3.0 S factor 0.9 IF=IF(AV) VR=400V Tj=125°C 2.5 Figure 8: Relative variations of dynamic parameters versus junction temperature IRM 0.8 0.7 2.0 0.6 QRR 0.5 1.5 0.4 0.3 1.0 IF=IF(AV) VR=400V Reference: Tj=125°C 0.2 0.5 0.1 dIF/dt(A/µs) 0.0 Tj(°C) 0.
PAGE 5
STTH3R06 Figure 13: Thermal resistance junction to ambient versus copper surface under lead (epoxy FR4, eCU=35µm) (SMB / SMC) Figure 14: Thermal resistance versus lead length Rth(j-a)(°C/W) Rth(°C/W) 110 100 100 90 90 80 DO-201AD 80 Rth(j-a) 70 SMB 70 60 60 SMC 50 50 40 40 Rth(j-l) 30 30 20 20 10 10 SCU(cm²) Llead(mm) 0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.
PAGE 6
STTH3R06 Figure 15: SMB Package Mechanical Data DIMENSIONS REF. E1 D E A1 A2 C L b Figure 16: SMB Foot Print Dimensions (in millimeters) 2.3 1.52 6/9 2.75 1.52 Millimeters Inches Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 1.95 2.20 0.077 0.087 c 0.15 0.41 0.006 0.016 E 5.10 5.60 0.201 0.220 E1 4.05 4.60 0.159 0.181 D 3.30 3.95 0.130 0.156 L 0.75 1.60 0.030 0.
PAGE 7
STTH3R06 Figure 17: SMC Package Mechanical Data DIMENSIONS REF. E1 D Millimeters Inches Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 2.90 3.2 0.114 0.126 c 0.15 0.41 0.006 0.016 E 7.75 8.15 0.305 0.321 E1 6.60 7.15 0.260 0.281 E2 4.40 4.70 0.173 0.185 D 5.55 6.25 0.218 0.246 L 0.75 1.60 0.030 0.063 E A1 A2 C L b Figure 18: SMC Foot Print Dimensions (in millimeters) 3.3 2.0 4.2 2.
PAGE 8
STTH3R06 Figure 19: DO-201AD Package Mechanical Data DIMENSIONS B note 1 A E B E ØD ØC REF. Millimeters Min. note 1 A B C D E ØD Inches Max. Min. 9.50 25.40 Max. 0.374 1.000 5.30 1.30 1.25 0.209 0.051 0.049 1 - The lead diameter ø D is not controlled over zone E note 2 - The minimum axial length within which the device NOTES 2may be placed with its leads bent at right angles is 0.59"(15 mm) In order to meet environmental requirements, ST offers these devices in ECOPACK® packages.
PAGE 9
STTH3R06 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice.