Datasheet

ManualsBrandsST ManualsDiodesRectifier Diode 60A 200V TOP3I

April 2006 Rev 2 1/9

STTH6002C

High efficiency ultrafast diode

Main product characteristics

Features and benefits

■ Suited for SMPS

■ Low losses

■ Low forward and reverse recovery times

■ High surge current capability

■ High junction temperature

Description

Dual center tab rectifier suited for switch mode

power supplies and high frequency DC to DC

converters.

Packaged in TO-247 and TOP3I, this device is

intended for use in low voltage, high frequency

inverters, free wheeling and polarity protection

Order codes

F(AV)

2 x 30 A

RRM

200 V

(max) 175° C

(typ) 0.75 V

(typ) 22 ns

Part Number Marking

STTH6002CW STTH6002C

STTH6002CPI STTH6002C

TO-247

STTH6002CW

TOP3I

STTH6002CPI

www.st.com

Summary of content (9 pages)

PAGE 1
STTH6002C High efficiency ultrafast diode Main product characteristics IF(AV) 2 x 30 A VRRM 200 V Tj (max) 175° C VF (typ) 0.75 V trr (typ) 22 ns A1 A2 K A2 Features and benefits ■ Suited for SMPS ■ Low losses ■ Low forward and reverse recovery times ■ High surge current capability ■ High junction temperature A1 K TO-247 STTH6002CW NC A2 Description A1 Dual center tab rectifier suited for switch mode power supplies and high frequency DC to DC converters.
PAGE 2
Characteristics STTH6002C 1 Characteristics Table 1. Absolute ratings (limiting values at Tj = 25° C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 200 V IF(RMS) RMS forward current 50 A TO-247 IF(AV) Average forward current, δ = 0.5 TOP3I IFSM Surge non repetitive forward current Tstg Storage temperature range Tj Table 2.
PAGE 3
STTH6002C Table 3. Characteristics Static electrical characteristics Symbol IR(1) Parameter Test conditions Tj = 25° C Reverse leakage current Max. Unit 30 VR = VRRM Tj = 125° C Tj = 25° C VF(2) Typ Forward voltage drop Tj = 150° C µA 30 300 IF = 30 A 1.05 IF = 60 A 1.18 IF = 30 A 0.75 0.84 IF = 60 A 0.9 0.99 V 1. Pulse test: tp = 5 ms, δ < 2 % 2. Pulse test: tp = 380 µs, δ < 2 % To evaluate the conduction losses use the following equation: P = 0.69 x IF(AV) + 0.
PAGE 4
Characteristics Figure 3. STTH6002C Relative variation of thermal Figure 4. impedance junction to case versus pulse duration Zth(j-c)/Rth(j-c) Junction capacitance versus reverse applied voltage (typical values) C(pF) 1.0 1000 Single pulse F=1MHz Vosc=30mVRMS Tj=25°C VR(V) tp(s) 100 0.1 1.E-03 1.E-02 Figure 5. 1.E-01 1 1.E+00 Reverse recovery charges versus dIF/dt (typical values) 10 Figure 6.
PAGE 5
STTH6002C 2 Ordering information scheme Ordering information scheme STTH 60 02 Cxx Ultrafast switching diode Average forward current 60 = 60 A Repetitive peak reverse voltage 02 = 200 V Package CW = TO-247 CPI = TOP3I 5/9
PAGE 6
Package information 3 STTH6002C Package information Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.8 Nm Maximum torque value: 1.0 Nm Table 5. TO-247 Dimensions DIMENSIONS REF. Millimeters Min. V Typ Inches Max. Min. Typ Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.40 0.039 0.055 Dia. V A H L5 F1 3.00 0.118 F2 2.00 0.078 F3 2.00 2.40 0.078 0.094 F4 3.00 3.40 0.118 0.
PAGE 7
STTH6002C Package information Table 6. TOP3I dimensions DIMENSIONS REF H Inches Min. Max. Min. Max. A 4.4 4.6 0.173 0.181 B 1.45 1.55 0.057 0.061 C 14.35 15.60 0.565 0.614 D 0.5 0.7 0.020 0.028 E 2.7 2.9 0.106 0.114 F 15.8 16.5 0.622 0.650 G 20.4 21.1 0.815 0.831 H 15.1 15.5 0.594 0.610 J 5.4 5.65 0.213 0.222 K 3.4 3.65 0.134 0.144 ØL 4.08 4.17 0.161 0.164 P 1.20 1.40 0.047 0.055 A R B ØL K F P G C J Millimeters J D E R 4.
PAGE 8
Ordering information 4 5 8/9 STTH6002C Ordering information Part Number Marking Package Weight Base qty Delivery mode STTH6002CW STTH6002C TO-247 4.46 g 30 Tube STTH6002CPI STTH6002C TOP3I 4.7 g 30 Tube Revision history Date Revision Description of Changes Feb-2004 1 First issue 05-Apr-2006 2 Reformatted to current template. Package TOP3I added.
PAGE 9
STTH6002C Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.