Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsMOSFET, N-Channel, 500V, 14A, 160W, TO-247

January 2007 Rev 4 1/19

STP15NK50Z/FP - STB15NK50Z

STB15NK50Z-1 - STW15NK50Z

N-channel 500V - 0.30Ω - 14A TO-220/FP/D

PAK/I

PA K /TO -247

Zener-protected SuperMESH™ Power MOSFET

General features

■ Extremely high dv/dt capability

■ 100% avalanche tested

■ Gate charge minimized

■ Very low intrinsic capacitances

■ Very good manufacturing repeatibility

Description

The SuperMESH™ series is obtained through an

extreme optimization of ST’s well established

strip-based PowerMESH™ layout. In addition to

pushing on-resistance significantly down, special

care is taken to ensure a very good dv/dt

capability for the most demanding applications.

Such series complements ST full range of high

voltage MOSFETs including revolutionary

MDmesh™ products.

Applications

■ Switching application

Internal schematic diagram

Type V

DSS

DS(on)

STP15NK50Z 500V <0.34Ω 14A 160 W

STP15NK50ZFP 500V <0.34Ω 14A 40 W

STB15NK50Z 500V <0.34Ω 14A 160W

STB15NK50Z-1 500V <0.34Ω 14A 160W

STW15NK50Z 500V <0.34Ω 14A 160W

TO-220

TO-220FP

TO-247

PAK

www.st.com

Order codes

Part number Marking Package Packaging

STP15NK50Z P15NK50Z TO-220 Tube

STP15NK50ZFP P15NK50ZFP TO-220FP Tube

STB15NK50ZT4 B15NK50Z D

PAK Tape & reel

STB15NK50Z B15NK50Z D

PAK Tube

STB15NK50Z-1 B15NK50Z I

PA K Tu be

STW15NK50Z W15NK50Z TO-247 Tube

Summary of content (19 pages)

PAGE 1
STP15NK50Z/FP - STB15NK50Z STB15NK50Z-1 - STW15NK50Z N-channel 500V - 0.30Ω - 14A TO-220/FP/D2PAK/I2PAK/TO-247 Zener-protected SuperMESH™ Power MOSFET General features Type VDSS RDS(on) ID Pw STP15NK50Z 500V <0.34Ω 14A 160 W 3 1 STP15NK50ZFP 500V <0.34Ω 14A 40 W STB15NK50Z 500V <0.34Ω 14A 160W STB15NK50Z-1 500V <0.34Ω 14A 160W STW15NK50Z 500V <0.
PAGE 2
Contents STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Electrical characteristics (curves) ............................. 7 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter Unit TO-220/D2PAK TO-220FP I2PAK/TO-247 VDS VDGR VGS Drain-source voltage (VGS = 0) 500 V Drain-gate voltage (RGS = 20KΩ) 500 V Gate-source voltage ± 30 V ID Drain current (continuous) at TC = 25°C 14 14(1) A ID Drain current (continuous) at TC=100°C 8.8 8.
PAGE 4
Electrical ratings STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Table 2. Rthj-a Tl Thermal data Thermal resistance junction-ambient max 62.5 Maximum lead temperature for soldering purpose 50 °C/W 300 °C 1. When mounted on minimum foot-print Table 3.
PAGE 5
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Electrical charac- 2 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 5. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test conditions ID = 1mA, VGS= 0 Min. Typ. Max. Unit 500 V VDS = Max rating, VDS = Max rating @125°C 1 50 µA µA Gate body leakage current (VDS = 0) VGS = ±20V ±10 µA VGS(th) Gate threshold voltage VDS= VGS, ID = 100µA 3.75 4.
PAGE 6
Electrical characteristics Table 7. Symbol ISD STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - Source drain diode Parameter Min Typ. Max Unit Source-drain current 14 A ISDM(1) Source-drain current (pulsed) 56 A VSD(2) Forward on voltage ISD=14A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD=14A, trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.
PAGE 7
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Electrical charac- 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for TO-220 D2PAK/I2PAK Figure 2. Thermal impedance for TO- 220 D2PAK/I2PAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for TO-247 Figure 6.
PAGE 8
Electrical characteristics STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - Figure 7. Output characterisics Figure 8. Transfer characteristics Figure 9. Transconductance Figure 10. Static drain-source on resistance Figure 11. Gate charge vs gate-source voltage Figure 12.
PAGE 9
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Electrical characFigure 13. Normalized gate threshold voltage vs temperature Figure 14. Normalized on resistance vs temperature Figure 15. Source-drain diode forward characteristics Figure 16. Normalized BVDSS vs temperature Figure 17.
PAGE 10
Test circuit 3 STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Test circuit Figure 18. Switching times test circuit for resistive load Figure 19. Gate charge test circuit Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit Figure 22. Unclamped inductive waveform 10/19 Figure 23.
PAGE 11
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Package mechani- 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label.
PAGE 12
Package mechanical data STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.
PAGE 13
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Package mechani- TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. TYP. 4.6 0.173 0.181 MAX. 0.106 B 2.5 2.7 0.098 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.
PAGE 14
Package mechanical data STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 10.4 0.393 D1 E 8 10 E1 0.315 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.
PAGE 15
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Package mechani- TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.
PAGE 16
Package mechanical data STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - TO-247 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 0.134 b2 3.0 3.40 0.118 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 e 5.45 0.620 0.214 L 14.20 14.80 0.560 L1 3.70 4.30 0.14 L2 18.50 0.582 0.17 0.728 øP 3.55 3.65 0.140 0.143 øR 4.
PAGE 17
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z 5 Packaging me- Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.
PAGE 18
Revision history 6 STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Revision history Table 8.
PAGE 19
STP15NK50Z - STP15NK50ZFP - STB15NK50Z - STB15NK50Z-1 - STW15NK50Z Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.