Datasheet

ManualsBrandsST ManualsAmplifiers & ComparatorsComparator, 18V, 16mA, SOT-23

March 2017

DocID6324 Rev 8

1/14

This is information on a product in full production.

www.st.com

TS391, TS391A

Low-power single voltage comparator

Datasheet - production data

Features

Wide single supply voltage range or dual

supplies 2 V to 36 V or ±1 V to ±18 V

Very low supply current (0.2 mA)

independent of supply voltage

(1 mW/comparator at 5 V)

Low input bias current: 25 nA typ.

Low input offset current: ±5 nA typ.

Low input offset voltage: ±2 mV max. for

TS391A

Input common-mode voltage range includes

ground

Low output saturation voltage: 250 mV typ.

= 4 mA)

Differential input voltage range equal to the

supply voltage

TTL, DTL, ECL, CMOS compatible outputs

Description

This device consists of a low-power voltage

comparator designed specifically to operate from

a single supply over a wide range of voltages.

Operation from split power supplies is also

possible.

This comparator also has a unique characteristic

in that the input common-mode voltage range

includes ground, even though operated from a

single power supply voltage.

Summary of content (14 pages)

PAGE 1
TS391, TS391A Low-power single voltage comparator Datasheet - production data Description This device consists of a low-power voltage comparator designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. This comparator also has a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage.
PAGE 2
Contents TS391, TS391A Contents 1 Schematic diagram.......................................................................... 3 2 Package pin connections................................................................ 4 3 4 Absolute maximum ratings and operating conditions ................. 5 Electrical characteristics ................................................................ 6 5 Electrical characteristic curves ......................................................
PAGE 3
TS391, TS391A 1 Schematic diagram Schematic diagram Figure 1: Schematic diagram DocID6324 Rev 8 3/14
PAGE 4
Package pin connections 2 TS391, TS391A Package pin connections Figure 2: Pin connections (top view) 4/14 DocID6324 Rev 8
PAGE 5
TS391, TS391A 3 Absolute maximum ratings and operating conditions Absolute maximum ratings and operating conditions Table 1: Absolute maximum ratings (AMR) Symbol Parameter VCC Supply voltage Vid Differential input voltage Vi Input voltage Vo Output voltage (1) ±36 V -0.
PAGE 6
Electrical characteristics 4 TS391, TS391A Electrical characteristics Table 3: VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C (unless otherwise specified) Symbol Parameter and test conditions TS391 Vio TS391A TS391 Iib TS391A Min. Input offset voltage (1) AVD ICC 1 5 Input offset voltage 1 Input offset voltage, Tmin ≤ Tamb ≤ Tmax Input bias current mV 1.
PAGE 7
TS391, TS391A Electrical characteristic curves Figure 4: Response time for various input overdrives negative transition Output voltage (V) Figure 3: Supply current vs. supply voltage Input voltage (mV) 5 Electrical characteristic curves Figure 5: Input current vs. supply voltage Figure 6: Response time for various input overdrives positive transition Figure 7: Output saturation voltage vs.
PAGE 8
Package information 6 TS391, TS391A Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
PAGE 9
TS391, TS391A 6.1 Package information SOT23-5 package information Figure 8: SOT23-5 package outline Table 4: SOT23-5 mechanical data Dimensions Ref. A Millimeters Inches Min. Typ. Max. Min. Typ. Max. 0.90 1.20 1.45 0.035 0.047 0.057 A1 0.15 0.006 A2 0.90 1.05 1.30 0.035 0.041 0.051 B 0.35 0.40 0.50 0.014 0.016 0.020 C 0.09 0.15 0.20 0.004 0.006 0.008 D 2.80 2.90 3.00 0.110 0.114 0.118 D1 1.90 0.075 e 0.95 0.037 E 2.60 2.80 3.00 0.102 0.110 0.
PAGE 10
Package information 6.2 TS391, TS391A DFN8 2x2 package information Figure 9: DFN8 2x2 package outline Table 5: DFN8 2x2 mechanical data Dimensions Ref. A Millimeters Min. Typ. Max. Min. Typ. Max. 0.51 0.55 0.60 0.020 0.022 0.024 A1 0.05 A3 0.002 0.15 0.006 b 0.18 0.25 0.30 0.007 0.010 0.012 D 1.85 2.00 2.15 0.073 0.079 0.085 D2 1.45 1.60 1.70 0.057 0.063 0.067 E 1.85 2.00 2.15 0.073 0.079 0.085 E2 0.75 0.90 1.00 0.030 0.035 0.
PAGE 11
TS391, TS391A Package information Figure 10: DFN8 2x2 recommended footprint DocID6324 Rev 8 11/14
PAGE 12
Ordering information 7 TS391, TS391A Ordering information Table 6: Order codes Part number Temperature range TS391ILT Packaging -40 °C to 125 °C SOT23-5 (automotive grade) Marking K511 SOT23-5 TS391AILT TS391IYLT (1) Package K512 Tape and reel K510 TS391RILT SOT23-5 K509 TS391IQ2T DFN8 2x2 K5D Notes: (1)Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q002 or equivalent.
PAGE 13
TS391, TS391A 8 Revision history Revision history Table 7: Document revision history Date Revision 22-Sep-2004 1 Initial release. 06-Jan-2006 2 PPAP reference inserted in the document. 3 Added values for Rthja, Rthjc and ESD in Table 1: Absolute maximum ratings (AMR). Added footnote for automotive grade order code in order codes table. Updated format.
PAGE 14
TS391, TS391A IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.