Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsThyristor, TO-252, 600V, 8A

This is information on a product in full production.

May 2014 DocID7476 Rev 8 1/17

TN805, TN815, TS820, TYN608

Sensitive and standard 8 A SCRs

Datasheet - production data

Features

• On-state rms current, I

T(RMS)

8 A

• Repetitive peak off-state voltage, V

DRM

RRM

600 and 800 V

• Triggering gate current, I

0.2 to 15 mA

Description

Available either in sensitive (TS8) or standard

(TN8 / TYN) gate triggering levels, the 8 A SCR

series is suitable to fit all modes of control found

in applications such as overvoltage crowbar

protection, motor control circuits in power tools

and kitchen aids, inrush current limiting circuits,

capacitive discharge ignition and voltage

regulation circuits.

Available in through-hole or surface-mount

packages, they provide an optimized performance

in a limited space.

DPAK

TO-220FPAB

IPAK

TO-220AB

Table 1. Device summary

Order code

Voltage (x00)

DRM

RRM

Sensitivity

Package

600 V 800 V

TS820-600B X 0.2 mA DPAK

TS820-600H X 0.2 mA IPAK

TS820-600T X 0.2 mA

TO-

220AB

TS820-600FP X 0.2 mA

TO-

220FPA

TN805-600B X 5 mA DPAK

TN815-x00B X X 15 mA DPAK

TYN608RG X 15 mA

TO-

220AB

www.st.com

Summary of content (17 pages)

PAGE 1
TN805, TN815, TS820, TYN608 Sensitive and standard 8 A SCRs Datasheet - production data A Description K Available either in sensitive (TS8) or standard (TN8 / TYN) gate triggering levels, the 8 A SCR series is suitable to fit all modes of control found in applications such as overvoltage crowbar protection, motor control circuits in power tools and kitchen aids, inrush current limiting circuits, capacitive discharge ignition and voltage regulation circuits.
PAGE 2
Characteristics 1 TN805, TN815, TS820, TYN608 Characteristics Table 2. Absolute ratings (limiting values) Value Symbol TN805 Parameter Unit TN815 TYN608 TS820 IT(RMS) Tc = 110 °C On-state rms current (180° conduction angle) 8 A 5 A T0-220FPAB, Tc = 91 °C Tc = 110 °C IT(AV) Average on-state current (180° conduction angle) ITSM Non repetitive surge peak on-state current tp = 8.
PAGE 3
TN805, TN815, TS820, TYN608 Characteristics Table 4. Standard electrical characteristics (Tj = 25 °C, unless otherwise specified) Symbol IGT Test conditions TN805 TN815 TYN608 MIN. 0.5 2 2 MAX. 5 15 15 Unit mA VD = 12 V, RL = 33 Ω VGT MAX. 1.3 V MIN. 0.2 V VGD VD = VDRM, RL = 3.3 kΩ IH IT = 100 mA , gate open MAX. 25 40 30 mA IL IG = 1.2 IGT MAX. 30 50 70 mA 50 150 150 V/µs Tj = 125 °C dV/dt VD = 67% VDRM, gate open Tj =125 °C MIN.
PAGE 4
Characteristics TN805, TN815, TS820, TYN608 Figure 3. Average and DC on-state current versus ambient temperature Figure 4. Relative variation of thermal impedance junction to case versus pulse duration IT(AV)(A) K=[Zth(j-c)/Rth(j-c)] 2,5 1.0 Recommended pad layout, FR4 printed circuit board D.C. α = 180° 2,0 0.5 TO-220AB TO-220FPAB 1,5 1,0 0.2 DPAK IPAK 0,5 tp(s) Tamb(°C) 0.1 0,0 0 25 50 75 100 1E-3 125 Figure 5.
PAGE 5
TN805, TN815, TS820, TYN608 Characteristics Figure 9. Relative variation of dV/dt immunity Figure 10. Relative variation of dV/dt immunity versus gate-cathode resistance (typical values) versus gate-cathode capacitance (typical for TS820 values) for TS820 dV/dt[RGK] / dV/dt[RGK=220Ω] dV/dt[CGK] / dV/dt[RGK=220Ω] 10.00 15.0 Tj = 125°C VD = 0.67 x VDRM VD = 0.67 x VDRM Tj = 125°C RGK = 220Ω 12.5 10.0 1.00 7.5 5.0 0.10 2.5 RGK(kΩ) CGK(nF) 0.0 0.
PAGE 6
Package information 2 TN805, TN815, TS820, TYN608 Package information • Epoxy meets UL94, V0 • Lead-free packages • Recommended torque: 0.4 to 0.6 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 15.
PAGE 7
TN805, TN815, TS820, TYN608 Package information Table 6. DPAK dimension values Dimensions Ref. Millimeters Min. Typ. Inches Max. Min. Typ. Max. A 2.18 2.40 0.086 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 b 0.64 0.90 0.025 0.035 b4 4.95 5.46 0.195 0.215 c 0.46 0.61 0.018 0.024 c2 0.46 0.60 0.018 0.023 D 5.97 6.22 0.235 0.244 D1 5.10 E 6.35 E1 0.201 6.73 0.250 0.264 4.32 0.170 e1 4.40 4.70 0.173 0.185 H 9.35 10.40 0.368 0.
PAGE 8
Package information TN805, TN815, TS820, TYN608 Figure 17. IPAK dimension definitions E b4 A c2 V1 L2 1.20 ±0.010 Top E-MARK D L1 A1 e b2 L b c e1 Note: H this package drawing may slightly differ from the physical package. However, all the specified dimensions are guaranteed. Table 7. IPAK dimension values Dimensions Ref. Millimeters Min. Typ. Max. Min. Typ. Max. A 2.20 2.40 0.086 0.094 A1 0.90 1.10 0.035 0.043 b 0.64 0.90 0.025 0.035 b2 0.95 0.037 b4 5.20 5.43 0.
PAGE 9
TN805, TN815, TS820, TYN608 Package information Table 7. IPAK dimension values L2 0.80 V1 10° 1.25 0.031 0.049 10° Figure 18. TO-220AB dimension definitions A E ∅P Resin gate 0.5 mm max. protrusion(1) F Q H1 D D1 L30 L20 b1 J1 L1 L b e e1 Resin gate 0.5 mm max.
PAGE 10
Package information TN805, TN815, TS820, TYN608 Table 8. TO-220AB dimension values Dimensions Ref. Millimeters Min. Max. Min. Max. A 4.40 4.60 0.17 0.18 b 0.61 0.88 0.024 0.035 b1 1.14 1.70 0.045 0.067 c 0.48 0.70 0.019 0.027 D 15.25 15.75 0.60 0.62 D1 10/17 Inches 1.27 typ. 0.05 typ. E 10 10.40 0.39 0.41 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.19 0.20 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.24 0.26 J1 2.40 2.72 0.094 0.107 L 13 14 0.51 0.
PAGE 11
TN805, TN815, TS820, TYN608 Package information Figure 19. TO-220AB (NIns. & Ins.
PAGE 12
Package information TN805, TN815, TS820, TYN608 Table 9. TO-220AB (NIns. & Ins. 20-up) dimension values Dimensions Ref. Millimeters Min. A 15.20 a1 Max. Min. 15.90 0.598 3.75 Typ. Max. 0.625 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.
PAGE 13
TN805, TN815, TS820, TYN608 Package information Figure 20.
PAGE 14
Package information TN805, TN815, TS820, TYN608 Table 10. TO-220FPAB dimension values Dimensions Ref. Millimeters Min. Max. Min. Typ. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 F2 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 14/17 Typ. Inches 16 0.63 L3 28.6 30.6 1.126 1.205 L4 9.8 10.6 0.
PAGE 15
TN805, TN815, TS820, TYN608 3 Ordering information Ordering information Figure 21. TN8 series TN 8 05 - 600 B -TR Standard SCR series Current 8=8A Sensitivity 05 = 5 mA 15 = 15 mA Voltage 600 = 600 V 800 = 800 V Package B = DPAK Packing mode -TR = Tape and reel Figure 22. TS8 series TS 8 20 - 600 B (-TR) Sensitive SCR series Current 8=8A Sensitivity 20 = 200 µA Voltage 600 = 600 V Package B = DPAK H = IPAK T = TO-220AB FP = TO220FPAB Packing mode Blank = Tube -TR = Tape and reel Figure 23.
PAGE 16
Revision history TN805, TN815, TS820, TYN608 Table 11. Ordering information 4 Order code Marking Package Weight Base qty Delivery mode TN805-600B-TR TN805600 DPAK 0.3 g 2500 Tape and reel TN815-600B-TR TN815600 DPAK 0.3 g 2500 Tape and reel TN815-800B-TR TN815800 DPAK 0.3 g 2500 Tape and reel TS820-600B TS820600 DPAK 0.3 g 75 Tube TS820-600B-TR TS820600 DPAK 0.3 g 2500 Tape and reel TS820-600H TS820600 IPAK 0.4 g 75 Tube TS820-600T TS820600T TO-220AB 2.
PAGE 17
TN805, TN815, TS820, TYN608 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.