Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsThyristor, TO-220AB, 600V, 12A

September 2011 Doc ID 7475 Rev 7 1/13

TN1215, TS1220

TYN612, TYN812, TYN1012

Sensitive and standard 12 A SCRs

Features

■ On-state rms current, I

T(RMS)

12 A

■ Repetitive peak off-state voltage, V

DRM

RRM

600 to 1000 V

■ Triggering gate current, I

0.2 to 15 mA

Description

Available either in sensitive (TS1220) or standard

(TN1215 / TYNx12) gate triggering levels, the

12 A SCR series is suitable to fit all modes of

control, found in applications such as overvoltage

crowbar protection, motor control circuits in power

tools and kitchen aids, inrush current limiting

circuits, capacitive discharge ignition and voltage

regulation circuits.

Available in through-hole or surface-mount

packages, they provide an optimized performance

in a limited space area.

IPAK

TN1215-xxxH

TS1220-xxxH

TO-220AB

TYNx12RG

TYNx12TRG

DPAK

TN1215-xxxB

TS1220-xxxB

PAK

TN1215-xxxG

TS1220-xxxG

TO-220AB

TS1220-xxxT

Table 1. Device summary

Order code

Voltage (xxx) V

DRM

RRM

Sensitivity

Package

600 V 700 V 800 V 1000 V

TN1215-xxxB X X 15 mA DPAK

TN1215-xxxG X X 15 mA D

PA K

TN1215-xxxH X X 15 mA IPAK

TS1220-xxxB X X 0.2 mA DPAK

TS1220-xxxH X 0.2 mA IPAK

TS1220-xxxT X 0.2 mA TO-220AB

TYNx12RG X X X 15 mA TO-220AB

TYNx12TRG X X X 5 mA TO-220AB

www.st.com

Summary of content (13 pages)

PAGE 1
TN1215, TS1220 TYN612, TYN812, TYN1012 Sensitive and standard 12 A SCRs Features A ■ On-state rms current, IT(RMS) 12 A ■ Repetitive peak off-state voltage, VDRM/VRRM 600 to 1000 V A K A G G ■ K DPAK TN1215-xxxB TS1220-xxxB A Triggering gate current, IGT 0.
PAGE 2
Characteristics TN1215, TS1220, TYN612, TYN812, TYN1012 1 Characteristics Table 2. Absolute ratings (limiting values) Value Symbol IT(RMS) Parameter TN1215-G TN1215-B/-H TYNx12 TS1220-B/-H/T Unit RMS on-state current (180 °Conduction angle) Tc = 105 °C 12 A IT(AV) Average on-state current (180 °Conduction angle) Tc = 105 °C 8 A ITSM Non repetitive surge peak on-state current I ²t tp = 8.
PAGE 3
TN1215, TS1220, TYN612, TYN812, TYN1012 Table 4. Characteristics Standard electrical characteristics (Tj = 25 °C, unless otherwise specified) TN1215 Symbol TYN Test conditions Unit B/H IGT VGT VGD VD = VDRM RL = 3.3 kΩ IH IT = 500 mA Gate open IL IG = 1.2 IGT dV/dt VD = 67 % VDRM VTM ITM = 24 A Vt0 Rd IDRM IRRM Tj = 125 °C Gate open x12 MIN. 2 0.5 2 MAX. 15 5 15 MAX. 1.3 V MIN. 0.2 V MAX. 40 30 15 30 mA MAX. 80 60 30 60 mA 40 200 V/µs Tj =125 °C MIN.
PAGE 4
Characteristics Figure 3. TN1215, TS1220, TYN612, TYN812, TYN1012 Average and D.C. on-state current versus ambient temperature (DPAK) Figure 4. IT(AV)(A) Relative variation of thermal impedance junction to case versus pulse duration K=[Zth(j-c)/Rth(j-c)] 3.0 1.0 Device mounted on FR4 with recommended pad layout 2.5 D.C. 2.0 0.5 D2PAK 1.5 α = 180° DPAK 1.0 0.2 0.5 tp(s) Tamb(°C) 0.0 0 25 Figure 5.
PAGE 5
TN1215, TS1220, TYN612, TYN812, TYN1012 Figure 9. Characteristics Relative variation of dV/dt immunity Figure 10. Relative variation of dV/dt immunity versus gate-cathode resistance versus gate-cathode capacitance (typical values) for TS12 series (typical values) for TS12 series dV/dt[CGK] / dV/dt[RGK=220Ω] dV/dt[RGK] / dV/dt[RGK=220Ω] 4.0 10.0 Tj = 125°C VD = 0.67 x VDRM VD = 0.67 x VDRM Tj = 125°C RGK = 220Ω 3.5 3.0 2.5 2.0 1.0 1.5 1.0 0.5 RGK(kΩ) 0.1 CGK(nF) 0.
PAGE 6
Ordering information scheme 2 TN1215, TS1220, TYN612, TYN812, TYN1012 Ordering information scheme Figure 15. TN1215 series TN 12 15 - 600 B (-TR) Standard SCR series Current 12 = 12 A Sensitivity 15 = 15 mA Voltage 600 = 600 V 800 = 800 V Package B = DPAK G = D2PAK H = IPAK Packing mode Blank = Tube -TR = Tape and reel (DPAK and D2PAK) Figure 16.
PAGE 7
TN1215, TS1220, TYN612, TYN812, TYN1012 3 Package information Package information ● Epoxy meets UL94, V0 ● Lead-free packages In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. TO-220AB dimensions (devices TYNx12RG and TYNx12TRG) Dimensions Ref.
PAGE 8
Package information Table 7. TN1215, TS1220, TYN612, TYN812, TYN1012 TO-220AB dimensions (device TS1220-xxxT) Dimensions Ref. Dia Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 F2 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 G1 2.40 2.70 0.094 0.106 H2 10 10.40 0.393 0.
PAGE 9
TN1215, TS1220, TYN612, TYN812, TYN1012 Table 8. Package information IPAK dimensions Dimensions Ref. Millimeters Min. A E C2 B2 L Min. Typ. Max. 2.20 2.40 0.086 0.094 A1 0.90 1.10 0.035 0.043 A3 0.70 1.30 0.027 0.051 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.212 0.95 B5 D Max. A B3 L2 H Typ. Inches 0.037 0.30 0.035 C 0.45 0.60 0.017 0.023 C2 0.48 0.60 0.019 0.023 D 6 6.20 0.236 0.244 E 6.40 6.60 0.252 0.
PAGE 10
Package information Table 9. TN1215, TS1220, TYN612, TYN812, TYN1012 DPAK dimensions Dimensions Ref. E A B2 C2 L2 Millimeters Inches Min. Max. Min. Max. A 2.20 2.40 0.086 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.212 C 0.45 0.60 0.017 0.023 C2 0.48 0.60 0.018 0.023 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.251 0.259 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.
PAGE 11
TN1215, TS1220, TYN612, TYN812, TYN1012 Table 10. Package information D2PAK dimensions Dimensions Ref. Millimeters Min. A E C2 L2 D L L3 Typ. Inches Max. Min. Typ. Max. A 4.30 4.60 0.169 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.25 C 0.45 0.60 0.017 0.024 C2 1.21 1.36 0.047 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.28 0.393 0.405 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.
PAGE 12
Ordering information 4 TN1215, TS1220, TYN612, TYN812, TYN1012 Ordering information Table 11. Ordering information Order code(1) Marking(1) Package Weight Base qty Delivery mode TN1215-x00B TN12 15x00 DPAK 0.3 g 75 Tube TN1215-x00B-TR TN12 15x00 DPAK 0.3 g 2500 Tape and reel 2 TN1215-x00G TN1215x00G D PAK 1.5 g 50 Tube TN1215-x00G-TR TN1215x00G D2PAK 1.5 g 1000 Tape and reel TN1215-x00H TN12 15x00 IPAK 0.3 g 75 Tube TS1220-x00B TS12 20x00 DPAK 0.
PAGE 13
TN1215, TS1220, TYN612, TYN812, TYN1012 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.