ON OF F REC 220 Line Receiver REC 220 Line en Operating instructions
en Operating instructions The STABILA REC 220 Line is a simple-to-use receiver for the rapid capture of laser lines. The STABILA REC 220 Line can only receive pulse modulated laser beams. The receiver will not work with rotation lasers ! If you still have questions after reading through the operating instructions, you can obtain advice by telephone: +49 63 46 / 3 09-0 USA + Canada : 1.800.869.7460 Main components 3 12 50 mm 2“ 50 mm 2“ 2 4 11 ON OF F 9 5 1 REC 220 Line 8 10 13 6 7 1.
en Inserting / Replacing the batteries Slide the battery cover (7) in the direction of the arrow and insert new batteries in accordance with the symbols in the battery compartment. 2x 1,5V Alkaline AA, LR6, Mignon Remove the batteries if the unit will not be used for a long period ! + + Batteries weak Getting started Press the ON/OFF/VOLUME button (1). An audio signal and a short flash from the display will confirm, that the instrument is switched on.
en Height difference display 5 display steps and 3 LEDs indicate the divergence from the centre of the laser line. The central bar indicates the “in line” position of the REC 220 Line.
en Positioning and aligning the receiver Correct handling for attaining the correct measuring result: ON OF F ON OF F REC 220 Line Lin e ON 220 OF F REC ON OF F REC 220 Line Note: At close range ≤ 4 m / ≤ 13‘ , reflections can result in incorrect measurements.
en Bracket Fastening: Push the retaining clip into the guide groove until it engages. Pressing the release button releases the fixing and the retaining clip can be pulled off. ON OF F REC 220 Line 2. KLICK 1. ON Securing knob: Turning the securin knob fixes / releases the clamp with the receiver to/from the levelling staff. Read-off reference: on a line with the “In line” marks of the receiver.
en Technical data Measuring distance: Typical accuracy Detectable Spectrum: Acceptance Angle: Audio signals: Batteries: Operating life: Automatic Shutoff: Operating temperature range: Storage temperature range: Device protection class: Weight Receiver Bracket 4m -75 m /13‘ -246‘ depending on the unit type Fine: ± 1,0 mm ± 1/32 in 530 nm - 670 nm ± 45° Loud: > 90 dBA Low: 65 - 75 dBA 2x 1,5V Alkaline, Mignon, AA,LR6 > 50 hours 17 minutes -20°C to +60°C – 4 °F to +140 °F -40°C to +70°C –40 °F to +158 °F
Certificate of warranty for STABILA REC 220 Line Customer: Adress: Date of purchase: Dealer (stamp, signature):
STABILA Messgeräte Gustav Ullrich GmbH STABILA Inc. P.O. Box 13 40 / D-76851 Annweiler Landauer Str. 45 / D-76855 Annweiler 332 Industrial Drive South Elgin , IL 60177 Tel.: 00 49 (0) 63 46 / 309 - 0 Fax: 00 49 (0) 63 46 / 309 - 480 1.800.869.7460 e-mail: info@stabila.de www.stabila.