How true pro’s measure REC 500 RG Operating instructions RED/GREEN BEAM
en Contents Section • 1 Intended use 3 • 2 Safety information 3 • 3 Components of the unit 4 • 4 • 5 Display elements Commissioning 5 6 • • • • • • 5.1 5.2 5.3 5.4 5.5 5.6 Battery insertion/replacement Switching the unit on Setting rotation/line mode Setting optical guidance Setting acoustic guidance Adjusting the accuracy 6 6 6 7 7 7 • • • • • 6 6.1 6.2 6.3 6.
en 1 Intended use 2 Safety information Read the safety instructions and operating instructions through carefully. Congratulations on the purchase of your STABILA measuring tool. The STABILA REC 500 RG is an easy-to-use receiver for quickly locating red or green laser beams. The receiver functions with both pulse-modulated line lasers as well as rotation lasers.
en 3 Components of the unit REC 500 RG (protected against water and dust in accordance with IP 67) (1) Magnet (2) Display – 1x on front, 1x on rear 41 mm 1,60 inch (3) LED mode display (4) Laser receiver (5) “On line” marking (6) Vial (7) Retaining bracket mounting area (8) Loudspeaker (9) Battery compartment lid Buttons: (10) - On/Off - Acoustic guidance 12 LE D MODE (11) - Accuracy - LED mode (12) Retaining bracket (13) Reading reference 4
en 4 Display elements 5 (14) Rotation mode display (15) Line mode display (16) “On line” position (17) Display levels for height difference in relation to “On line” position (18) 4-level accuracy adjustment (19) Battery charge (20) Acoustic guidance
en 5 Commissioning 5.1 Battery insertion/replacement Open the battery compartment cover in the direction of the arrow, insert the new battery into the battery compartment according to the symbol. Suitable rechargeable batteries can also be used. LCD indicator: - Insert the new battery Used batteries should be disposed of at appropriate collection points. Do not dispose of in household waste. Do not leave in unit! If you do not intend to use the unit for an extended period, remove the batteries. 5.
en 5.4 Setting optical guidance LE D MODE Holding the button for longer switches LED mode on or off. Visibility at greater distances or in lower levels of light can be improved using the LED display. >3s 5.5 Setting acoustic guidance 1x 1x The “Acoustic guidance” button can be used to set the volume. 1x > 100 dBA 0 dBA 75 dBA 1x ± 5,0 mm ± 2,0 mm ± 5/64” 5/64” ± 13/64” 13/64” The options are loud, off or soft.
en 6 Functions 6.1 Visual guidance Height difference display The arrows indicate whether the receiver is too high or too low in relation to the laser beam. The line in the middle indicates the “On line” position of the receiver. In LED mode, 3 coloured LEDs also indicate the position. 6.2 Acoustic guidance The acoustic guidance is activated/deactivated using the “Acoustic guidance” button. A change in the pitch indicates that these positions have been exceeded.
en 6.4 Retaining bracket Mounting: Use the locating pins and the mounting screw to align and mount the retaining bracket on the rear of the receiver.
en 7 Technical data Accuracy: Very fine: + 0.3 mm / ± 1/64” Fine: + 1 mm / ± 3/64” Rough: + 2 mm / ± 5/64” Very rough: + 5 mm / ± 13/64” Receiving spectrum: 450–800 nm Acoustic signal: Loud: > 100 dBA Soft: 75 dBA Rotation laser speed: 300–1200 rpm Batteries: 1 x 1.
