User manual

8
GB
Operating instructions
The STABILA-LAX-200 is an easy-to-use crossed line laser. It is self-levelling in the
range ± 4.5° and enables levels to be determined quickly and accurately. The verti-
cally and horizontally projected laser lines provide exact alignment / working . The
different parts of this set enable a tripod or a long support pole to be constructed to
suspend the instrument between the floor and the ceiling. The pulsed laser-line
enables working over larger distances using a special laser-line-receiver ( see line
receiver manual) .
0049 / 63 46 / 3 09 - 0
We have endeavoured to explain the unit's handling and functioning in as clear and
comprehensible manner as possible. If, however, you still have any unanswered
questions, we should be pleased to provide advice over the telephone at any time
on the following telephone number:
Recycling programme for our EU customers:
In accordance with the WEEE regulations, STABILA provides a disposal
programme for electronic products at the end of their service life.
For more details, please contact:
www.STABILA.de / Recycling
or:
0049 / 6346 / 309-0
Main components
On/off button
Operating mode ON or READY
Protective cover
1/4" threaded connector for tripod
Battery compartment cover
B1
Magnets
(1a)
(1b)
(4)
(5)
(6)
(7)
(8)
A
Adapter wall bracket
(3)
Exit aperture for the horizontal and vertical laser lines
Accessories not included in price -> 17282
Fastening holes for:
Nails / screws
ON / OFF switch (for protecting during transport)
LEDs for displaying
(2)
(2a)
(2b)
Battery voltage
Adapterscrew 5/8” -> 1/4”
(9)
B2
C1
C2