User manual

en
Operating instructions
The STABILA LA-5P is a simple to operate 5 point laser for use horizontal and
vertical levelling and also for use in a plumb line function. This laser can
measure 90° angles with great precision. It is self-levelling in the
range ± 4,5° and enables levels to be determined quickly and accurately.
Read the User Manual along with the illustrated portion. Follow the general
instructions on the handling, care and maintenance of the instrument.
Observe the safety instructions on laser beams.
We have endeavoured to explain the unit‘s handling and functioning in as clear
and comprehensible manner as possible. If, however, you still have any un-
answered questions, we should be pleased to provide advice over the telephone
at any time on the following telephone number : 0049 / 63 46 / 3 09 - 0
Main components
(1) ON / OFF switch (for protecting during transport)
(2) LED green : Operating mode ON or READY
(3 a/b/c) Exit aperture : horizontal at 90° angle to each other
(4 a/b) Exit apertures : for plumb line laser
(5) Sliding cover - > horizontal exit aperture
(6) Foot - extendable
(7) Release lever
(8) Battery compartment cover
(9) Protective cover
(10) 1/4“ threaded connector for tripod
(11) Magnets
(12) Wall bracket
Before initial start-up :
The warning notice in your language must be clearly affixed on the laser
instrument at the position indicated. The appropriate stickers are enclosed.
This sticker with the warning notice written
in the usual language must be axed here
in place of the English text !
Batteries must be inserted -> changing batteries
A
A
LA SE R RA DI ATIO N
DO NO T ST AR E IN TO BE AM
LA SE R CL AS S 2