User manual

30
Control elements and connections
Camera (front and back side)
1 Infrared LEDs
Night vision function: In case of poor lighting conditions, the
light sensor automatically activates 24 hight-performance
infrared LEDs (visibility of up to approx. 15 m under ideal
conditions), in this case, the monitor image is shown in
black and white).
Note: The camera is equipped with an auto-mechanical
IR Cut filter: Thus, clicking can be heard when switching
over between day and night vision mode.
2 Objective
3 PIR sensor (motion detector)
4 Speaker
5 Antenna (for an optimum reception, the antenna must be as
vertical as possible)
6 Camera support (for wall or top installation of the camera,
or installation on another level and stable surface)
7 9 V DC IN (Connecting cable for power supply unit OUTPUT 9 V DC/0,6 A)
8 Pair key (for docking optional additional cameras)
9 Microphone
Mounting and installation
Mounting and connecting the monitor
The monitor is either suitable for standing on a surface or for being mounted on a wall.
Monitor installation on a surface
Place the monitor on a flat surface such that tilting is prevented and adjust it depending on the
angle of view.
Wall mounting of the monitor
Important information: First, install the monitor and camera only provisionally and check whether
a reliable radio transmission is assured on the planned place of action. Prior to drilling the holes
for the monitor support, check and optimize the arrangement of the system!
Make sure that no cables or conducts are placed in the wall which may be damaged when drilling!
Mark the desired position for the drilling holes
of the fixing screws by using the monitor support
as drilling jig. Drill both mounting holes and fix
the monitor support using screws which are
suitable for the respective base material. Make
sure that the screw heads fit into the opening
of the monitor support! Place the monitor on
the screws and slightly push it down for securing
it. Align the monitor depending on the angle of
view.
(8)
(5)
(1)
(2)
(3)
(6)
(4)
(7)
(9)