User manual

32
Indications in the LC display
Signal indication
Bar display showing the signal strength
2 Indication of channel/camera no.
The camera included in the scope of
supply of the set is automatically assigned
to transmission channel 1 (Cam1).
Additional cameras (as option) are
assigned during coupling (menu item
Pairing) according to the number 2 to 4. By pressing the Cam key, manual switchover between
the available cameras is possible. For an automatic switchover, press the Quad key.
3 SD memory card symbol
The SD memory card symbol is shown on the display as soon as a SD memory card is inserted
into the SD memory card slot.
4 Symbols
Internet connection failed: System is not connected to the Internet.
Internet connection is established: System is connected to the Internet.
Connection to the router is established, Internet connection is built up
System access done via app (via smartphone/tablet PC)
5 Intercom symbol
Appears when pressing the Talk key, disappears when the key is released.
6 Recording symbol
If recording is started (manually or automatically via timer, motion detector or Video Motion
Detection), the red l REC symbol is shown on the display.
7 Zoom symbol
Appears when pressing the Zoom key. Disappears when pressing again.
8 Overwrite symbol
When activating the Overwrite function in the main menu, the Overwrite symbol is shown.
9 New recording symbol
When a new recording is finished, the yellow symbol New recording is shown on the display which
automatically disappears after having played the recording.
10 Time stamp
Date and time indication
Signal strength Symbol Warning
Optimal
Good
No signal
OUT OF RANGE