User manual

39
Network settings
Note: Ensure that any network setting/modification is done by a qualified person only!
The dynamic IP addressing is activated by default. Your only need to assign a static IP address,
if your network is configured to use static IP addresses. The router setting possibly has to be
configured, if the DHCP server is activated.
Network information
Display of e.g. IP state (dynamic or static),
IP address, default gateway, MAC address,
UID number (as on back side of monitor).
Resetting the password
The password used to log on to the monitor via the app
can be reset to using this menu item.
Detect
Open the submenu Detect using the OK key for setting
the sensitivity of Video Motion Detection. The different
sensitivity levels low, medium, high or off can be
adjusted separately for each individual camera. (low
sensitivity: recording is started in case of a strong image
change, high sensitivity: recording is already started
in case of a light image change.)
First, use the
keys to select the camera and
confirm by pressing OK.
Afterwards use the
keys to set the desired
sensitivity and confirm by pressing OK.
Note: If the option off is set, recording is only started
through the motion detector of the respective camera.