User manual

Use the keys to select the day(s) of the week and confirm by pressing OK (selected days

are marked in blue).

If you wish permanent recording at the specified times (example: recording through cameras 2

and 3 is performed every Tuesday, Wednesday, and Thursday from 12:00 to 14:28 p.m.), use

the

keys to select Save and confirm by pressing OK.

You can check the values specified under Modify once again in window for the day of the week:

Your recording times specified for the respective camera(s) are shown here as blue bars.

Interrupting a recording

Press the Record key (on the top side of the monitor) to stop a programmed recording.

Deleting a programmed recording

Use the key to select Schedule Recording and open this menu item using the OK key, the

window for the current day of the week and the planned recording time(s) is shown.

If you want to delete programmed recording times for that day, use the

key to select Modify

and confirm by pressing OK (if you wish to delete entries for other days of the week, use the

keys to select the requested day first).

The display shows the window Schedule Recording.

Use the

keys to select the camera and confirm by pressing OK. Use the keys to

select the time windows and use the

keys to set the start/stop times of the time window

to be deleted.

Use the

keys to select the day and confirm by pressing the OK key.

For deleting, use the

keys to select Delete and confirm by pressing OK.

Deleting all programmed recordings using RESET

Important note: Please note that all other personal system settings (e.g. volume, monitor

brightness) are also reset to factory setting in this case!

In the menu Settings open the submenu Default Settings, and select Yes  or cancel system reset

by selecting No  and confirm by pressing OK.

File Overwrite

When activating the Overwrite function, the current

recording is used to overwrite the oldest files presup-

posed that the storage capacity of the inserted data

carrier is exhausted.

Open this menu item using the OK key and use the

keys to select Yes for activating the overwrite

function or No for deactivating it. Confirm your selection

by pressing OK.

Note: With deactivated Overwrite function

no recording is performed when the data carrier

is full!