User manual

Camera Setup

For specifying your camera settings, select the menu

Camera, the submenu Camera Setup with 4 menu

items is shown:

Pairing: For coupling (optional) additional cameras

to the monitor

Camera ON/OFF: For switching on/off the individual

cameras.

Brightness: For setting the brightness of the monitor

Resolution: For setting the image resolution

Pairing (coupling):

The stabo multifon security lV can be extended: Up

to 4 cameras can be connected (additional cameras

can be obtained as option). Each additional camera

has to be individually linked to the monitor (the camera

included in the scope of delivery (Cam1) is already

coupled ex works to the monitor).

To do so, switch on the additional camera and the

monitor:

In the submenu Camera Setup,use the

keys to

select Pairing (confirm by pressing OK). Use the

keys to assign the desired camera number (2, 3, or 4)

to the additional camera and confirm by pressing OK.

The following is shown on the display: PLEASE PRESS

PAIR KEY ON CAMERA SIDE.

Now, press the PAIR key on the back side of the camera

within the following 30 sec.

By pressing the PAIR key, coupling is done automatically

and the image shot by the additional camera is shown

on the monitor.

Note: If the PAIR key of the camera is not pressed within

30 seconds, the monitor returns to normal mode and

the additional camera is not coupled.

Camera ON/OFF

Open the submenu Camera ON/OFF using the OK

key for switching on/off the cameras (when using

several cameras).

Use the

keys to select the camera.

Now, use the

keys to select ON or OFF.

Confirm your setting by pressing OK.

(8)