User manual

-7-
4.2 Connect the Camera
a) Install the antenna to cameras
b) Connect all cameras to AC/DC adapter, plug the AD/DC adapter into wall AC outlet.
Signal LED in front of the camera indicates signal condition.
1) BLUE steady ON – Signal is high
2) BLUE flashing - Signal is medium
3) RED steady ON - Signal is low
Note:
All LEDs will be turned OFF after 1 minute.
4.3 Live View Video Monitoring
4.3.1 On-Screen Display
(1) Camera channel No#
(2) Recording in progress
(3) Wireless signal
(4) Time / Date Stamp
(5) Main menu
(6) Brightness
(7) Record (# No hard drive，can not
record)
(8) Return
(A) 1-Channel ZOOM In  4-Channel Preview
*In Live View mode / Record mode / Video file playback mode, point & click LEFT mouse button
to zoom in single channel. In zoom-in mode, LEFT-click mouse again to restore 4-channel
view.
*In front panel keypad and IR remote controller, press [CH] button to display single channel & 4T
mode in sequence.
4T mode  CH1  CH2  CH3  CH4  4T mode  CH1 …..