User manual

-13-
2. (a) Activate/disable camera
Use [LEFT / RIGHT] button to select channel. Press
[ENTER] button to toggles between <ON> and <OFF>.
Channels disabled will NOT video to NVR.
5.2.3 Brightness
Adjusts individual camera Live View screen brightness.
1. Press [ENTER] button to start. Camera channel 1 is selected.
2. Use [UP / DOWN / LEFT / RIGHT] buttons to select target camera with
level bar turns RED
3. Press [ENTER] button to change level from 1 to 5. Default level is 3.
5.2.4 Volume
Adjusts individual camera audio level.
1. Press [ENTER] button to start. Camera channel 1 is selected
2. Use [UP / DOWN / LEFT / RIGHT] buttons to select target camera with
level bar turns RED
3. Press [ENTER] button to change level from 0 to 5. Default level is 3.
5.2.5 MD Sensitivity(Motion Detect Sensitivity)
Adjusts individual camera’s Motion Detect Sensitivity level.
1. Press [ENTER] button to start. Camera channel 1 is selected
implemented in demo NVR
Press [ENTER] button to change