User manual

-19-
5.5.2 Power Saving (Turn OFF video Out put)
1. Press [ENTER] button entering “Power Saving” menu. Default is NO
POWER SAVING
2. Use [UP / DOWN / LEFT / RIGHT] button to select screen off time
3. Press [ENTER] button to confirm.
When video signal is disabled, user can press any key to enable video output
again
5.5.3 Default Setting
This option restores factory setting.
1. Press [ENTER] button start setting. Default value is <CANCEL>
2. Use [LEFT / RIGHT] to select <Confirm>
3. Press [ENTER] button to confirm factory setting restore, or [MENU] button to
exit.
CAUTION: All camera will become NOT PAIRED after restoring default settings, user
must redo pairing to receive video transmission
5.5.4 Language Setting
Change the system language. Current demo NVR supports English, Dutch and German.
Other language pack can be added as option.
Default – NO power saving
Change power saving time, press [ENTER] to confirm