User manual

Enter your WPA encryption key
under Password and tap Next.
Afterwards, enter the password
00000 (under Enter Device
Password) and tap Save.
The message Add New Camera
Successfully is displayed. Confirm
by pressing OK.
Tap the camera symbol.
You are now requested to change
the preset password (000000). The
new password must be composed
of 8-16 characters (numbers and
letters).
Notes: Note your new password.
You will need it for adding further
mobile devices!
Reset to preset password (000000):
Press the RESET key on the back
of the camera for at least 5 sec.
until the power LED is blinking
rapidly.
Enter the new password twice and
tap Save.
26