User manual
b) Manual Input
Tap Manual Input.
Enter the name of the camera and the DID no. (see Advanced Settings on the mobile device
you have used for the initial installation) as well as your password. Afterwards, tap Save.
The message Add New Camera Successfully is displayed. Confirm by pressing OK. The live
image of the camera is shown.
c) Search in Local Network
Briefly (!) press the RESET key on the back of the camera: The status LED is lit permanently.
Tap Search in Local Network.
The connected camera is shown: Tap the cameras corresponding code (DID number).
Enter your password and tap Save.
The message "Add New Camera Successfully" is displayed. Confirm by pressing OK. The live
image of the camera is shown.
28