User manual

3. Motion Detection

Tap Motion Detection.

This option is used to adjust the sensitivity of VMD (Video Motion Detection):

Three sensitivity levels are available: low, medium, high or off (low sensitivity: recording is started

in case of a strong image change, high sensitivity: recording is already started in case of a light

image change.)

Select the requested sensitivity level and store by pressing Save.

Note: If the function is set to off , recording is only started through the motion detector of the

camera.

The message "Successfully Saved Settings" is displayed. Confirm by pressing OK.

4. Push Notification (automatic

notification)

Upon demand, a notification (push

notification) can be sent to your

mobile device, if the camera de-

tects a movement (via motion de-

tector or Video Motion Detection).

Mark Push Notification by placing

a tick mark in the corresponding

field and store by pressing Save.

The message "Successfully Saved

Settings" is displayed. Confirm by

pressing OK.