User manual

Use Password to enter the WPA
encryption code of your WLAN
router and tap Save afterwards.
The message "Modify WLAN
Network Successfully" is displayed.
Confirm by pressing OK.
Briefly switch the camera off and
on again. The camera is now
connected to the WLAN network
and you can view the live image
with the help of the app (through
WiFi or GSM signal).
11. Light Settings (settings of LED spotlight)
This option is used to activate/deactivate the spotlight function to be triggered through movement
detection and to specify the power-on time of the spotlight after activation (Duration), to select
the brightness level of the LED
spotlight (Dimmer) and to set the
timer switch for specific lighting
periods (Timer).
Tap Light Settings.
Tap Duration (on/off and power-
on time of LED spotlight)
When set to OFF , the spotlight
function is deactivated for being
triggered through movement
detection.
When the spotlight function is
activated, the LEDs are activated
through the PIR sensor of the
camera and/or Video Motion
Detection, where the integrated
twilight sensor controls the
activation of the light. When
activated through movement
detection, the LED spotlight
remains switched on for 1, 3 or 10
min.: Select the requested power-
on time.
Tap Save to store your setting.
35