Installation Instructions

GENERAL INFORMATION

This APPLICATION GUIDE has been designed to give the

installer a GENERAL DESCRIPTION of a RoofKit fully

adhered white roof system. This APPLICATION GUIDE is

intended as a reference aid only and is not intended or meant

to be all-inclusive.

RoofKit User Cautions and Warnings!

• The White Membrane is slippery especially when wet,

dusty or covered with snow, frost or ice. Please read and

follow all cautions and warnings, including notice on the

white membrane roll.

• Always use fall protection systems when working on rooftops.

• Be sure to comply with all OSHA and other safety

standards while working on a roof.

• Be sure to stay well away from overhead obstructions and

power lines making sure neither your body nor equipment

has contact with them.

• Safeguard against falling by reading ladder manufacturer's

warnings; and by establishing a perimeter warning system

utilizing ropes with flags attached. Always work with a

friend and never work with your back to the roof's edge.

• Read Caution labels on all adhesive, primer and sealant

containers. These materials may contain petroleum distillates

and can be extremely flammable. Care must be taken

to avoid open flames. Do not smoke when using these

products. Material Safety Data Sheets (MSDS) are available

for these products and should be consulted.

• Adhesives should be used in a well-ventilated area. Avoid

inhalation of any fumes. Care should be taken to ensure

fumes do not enter the building through windows or fresh-

air-intake ventilation fans.

• Avoid adhesive contact with skin. Chemically resistant

gloves are required. If adhesive comes in contact with skin,

wash with soap and water.