Installation Instructions
2
GENERAL INFORMATION
This APPLICATION GUIDE has been designed to give the
installer a GENERAL DESCRIPTION of a RoofKit fully
adhered roof system. This APPLICATION GUIDE is intended
as a reference aid only and is not intended or meant to be all-
inclusive.
Prior to the installation of a RoofKit roof system, it is
recommended that the installer view the RoofKit “Instructional”
Video. This video is available from your local RoofKit dealer or
visit RoofKitroong.com.
Remembering a few, simple things not to do when installing
RoofKit can help ensure a smooth and successful installation.
• Never use solvent-based roof cement on a rubber roof
• Never use aluminum coatings
• Never use RoofKit Latex Adhesive for rubber-to-rubber
seaming
• Never use RoofKit Contact Adhesive packaged in a ve-
gallon metal bucket for rubber-to-rubber seaming
• Never bond RoofKit EPDM membrane directly to the ange
of a metal drip edge
• Never bond RoofKit EPDM membrane on top of shingles
• Never adhere RoofKit EPDM unless contact and or multipur-
pose adhesive is dry to the touch
• Never use Seam Tape or Tape Flashing as cover strip
• Never use "ice and watershield" in, or as part of, your RoofKit
EPDM roof installation
• Never use RoofKit Rubber Roong Products as pond liner.
RoofKit User Cautions and Warnings!
• Read Caution labels on all adhesive, primer and sealant
containers. These materials contain petroleum distillates and
are extremely ammable. Care must be taken to avoid open
ames. Do not smoke when using these products. Safety Data
Sheets (SDS) are available for these products and should be
consulted.
• Adhesives should be used in a well-ventilated area. Avoid
inhalation of any fumes. Care should be taken to ensure
fumes do not enter the building through windows or fresh-
air-intake ventilation fans.