User's Manual

EN
EN
6 7
The GS symbol on the mains adapter stands for tested
safety. Products labelled with this symbol meet the require-
ments of the German Product Safety Act (ProdSG).
This symbol indicates that the wall adapter is a device
belonging to protection class II.
Declaration of conformity (see chapter “Declaration of
conformity”): This symbol indicates products that full
all applicable Community regulations in the European
Economic Area.
This symbol certies that the radiated electromagnetic
interference of the device is under the limit approved by the
US Federal Communications Commission.
ETL Listed test seal: Products labelled with this symbol
meet the requirements of electrical product safety of the
United States of America.
The wall adapter may only be used indoors.
PROPER USE
The DMINI is designed as a speaker for private use. It is not suitable for
commercial use. You can connect to a source device of your choice in the
following ways: You can connect the source device to the DMINI via Blue-
tooth®5.0, EDR, NFC or using an AUX cable.
The DMINI also has a powerbank function, that is, you can also connect
suitable external devices to the DMINI and charge them using the inte-
grated rechargeable battery of the DMINI.
The power cable contained in the package contents is designed for
charging the D MINI. If you want to charge an external device on the
DMINI using the powerbank function, you may, depending on the respec-
tive external device, need an additional cable that is not included in the
package contents.
Only use the DMINI as described in this user manual. Any other use is
deemed improper and may result in damage to property or even injury to
persons. The DMINI is not a children’s toy.
The manufacturer or vendor accepts no liability for damage caused by
improper or incorrect use.
WARNING
Risk of electrical shock!
SAFETY NOTES
Improper handling, incorrect electrical installation or excessive mains
voltage may result in an electrical shock.
- Make sure that the mains voltage of the socket corresponds to
the specication on the rating plate if you connect the DMINI to
it for charging purposes.
- Make sure that the socket that you connect the D MINI to is
readily accessible so that you can quickly disconnect the DMINI
from the mains supply in the event of a fault.
- Only use the power cable contained in the package contents to
charge the DMINI.
- Stop using the DMINI if it exhibits visible damages or if the power
cable or its connector plug is defective.
- Do not in any case open the housing of the D MINI. Instead,
contact a qualied workshop for repairs. Liability and warranty
claims are excluded in the event of repairs performed by yourself,
improper connection or incorrect operation.
- Only parts that comply with the original device data may be used
for repairs. There are electrical and mechanical parts in the
device which are necessary in order to avoid exposure to sources
of danger.
- Do not in any case submerge the DMINI and the power cable in
water or other liquids.
- Do not use the DMINI in the rain or in wet rooms.
- Make sure that the DMINI and the power cable do not come into
contact with open ames and hot surfaces.
- Make sure that the power cable is not kinked and do not lay it
over sharp edges.