Operation Manual
RoHS
compliant
4
USER’S MANUAL
EDA 40
INSTRUCTIONS FOR USE:
Plug the mains lead into a suitable power socket and connect your instrument to the input socket of the
amplier with a suitable cable (this cable is not supplied with the amplier, but is normally supplied with the
instrument). Finally, press the Power Switch to the ON position, the switch will light up and your amplier
is ready for use.
The EDA-40 amp can be tilted back and stabilised by inserting the crutch-like amplier rest – provided – in
the hole in the metal plate at the back, or mounted on a tripod-style stand, by switching the metal plate at
the back and the one on the underside of the amp, using a crosshead screwdriver.
IMPORTANT SAFETY INSTRUCTIONS:
READANDKEEPTHESEINSTRUCTIONSHEEDALLWARNINGS.
• If, after you have followed the instructions outlined above, your amplier fails to function, please contact
your vendor. Under no circumstances should the amplier be opened. Leave all servicing to qualied
personnel.
•Electrical appliances must never be used in conditions of high humidity or heat.
To prevent any risk of re or electric shock, never spill or splash liquids on the amplier.
Should this happen, unplug the power cable from the mains outlet immediately.
• We would like to draw your intention to the instructions printed on the notice attached to the back of
the amplier.
• Exposure to extremely high noise levels may cause permanent hearing damage (especially when using
headphones). Please use this amplier responsibly for you and your neighbourhood.
MARKING & CONFORMITY:
1. The CE mark on this product means it conforms to the EMC Directive (89/69/EEC), CE marking Directive
(93/68/EEC) and Low Voltage Directive (72/23/EEC).
2. The «Crossed-out Wheeled Bin» is to draw your attention to the WEEE (Waste Electric & Electronic
Equipment) Directive (2002/96/EC). It means this apparatus must be collected separately for recycling.
3. «RoHS compliant» means this device conforms to the Directive (2002/95EC) on the restriction of the use
of certain hazardous substances in electrical and electronic equipments, such as: Mercury, Lead, Cadmium,
Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Esthers (PBDE).
USER’S MANUAL
DISTRIBUTOR / DEALER
EMD Music 07-2010-UK
EDA 40
40W ELECTRONIC DRUM AMPLIFIER