Operation Manual

4
5
MASTER CONTROL SECTION
1. AUX RET
These two unbalanced 2-pole phone jacks are used for stereo AUX line input (the rated input level
is -10dB). If the signal source is mono please plug into the left channel socket only (L/MONO).
2. AUX SEND
This jack socket sends the signals to an auxiliary source.
3. PHONES
This jack socket sends the signals from main output or tape player to the headphones.
4. REC OUT
These two RCA sockets send stereo signals for recording purposes.
5. 2TK RET
These two RCA sockets send stereo signals from an external source.
6. MAIN
These balanced 1/4” (Ø 6.3 mm) jack outputs send line level signals from the mixer to external
devices such as an EQ unit or a power ampli er.
7. CTRL RM
These two jack sockets send stereo signals from the master output or an external player to the
control room speakers.
8. Controls for built-in player
These keys allow you operate the built-in player.
9. USB
This unit has a built-in music player. Insert in this USB port any memory stick containing songs to
be played through this device.
10. Display for built-in player
This LCD display shows the current status of the built-in player.