Operation Manual

4
5
MASTER CONTROL SECTION
REAL PANEL SECTION
11. MAIN OUTPUT CONTROL
This slide fader is used for adjusting the  nal output level
sent to the main output sockets.
12. Output Level Meter
This level meter Indicates the signal level of the stereo
master output.
13. Power Indicator
This LED indicates whether this unit is switched on or not.
14. AUX RET
Use this knob to control the signal level sent from AUX
return to the stereo main bus.
15. AUX SEND
Use this knob to control the signal level sent to the AUX
SEND socket.
16. 2TK/MP3 TO MIX
Use this knob to control the Input signal from 2TK RET
sockets or USB interface and SO card to main stereo bus.
17. 2TK/MP3 TO CTRL RM
Press this button to send the PLAY signals or the signal from
USB interface to the control room and headphones; release
this button to send the main signals to the control room and
headphones.
18. PHONES/CTRL RM
Use this knob to control the signal level of control room and
headphones.
19. EFF SELECT
Use this knob to select the effects of built-in effects
processor.
20. EFF LEVEL
Use this knob to control the effect signal level sent from
built-in effects processor to main stereo channel.
1. 17.5Vx2 AC Power Supply Socket
This AC power supply socket is used for connect the
adapter attached( do not use other adapter).
2. AC Power Switch
Use this switch to turn on/off the AC power.
13
12
11
19
20
15
14
16
18