Operation Manual

34 35
User’s manUalUser’s manUal ssP-830
34 35
User’s manUalUser’s manUal
SYNTH
The SYNTH function provides the tools for creating new tones. Simply select one of 328 tones available
and edit it’s parameters to create your own original sound.
1. Pressthe«SYNTH»button.The«SYNTH»agwillappearontheLCD,whiletheUserVoicenum-
ber «USER Voice= 342» is displayed on the lattice area. Then, use the DIAL or the (+) & (-) buttons to
select the desired User Voice number from 342-350 to store your own voice(s).
2. Press the « NEXT » button. The PCM Voice number «PCM Voice= 001» is highlighted on the lattice
area. Select the desired voice from 001-328 with the DIAL or the (+) & (-) buttons.
3. Press the « NEXT » or « BACK » buttons to select the following parameters: Vibrato Rate, Vibrato
Depth, Vibrato Delay, Envelope-Attack, Envelope-Decay & Envelope-Release. The name & value of the
current parameters are highlighted on the lattice area. These can be adjusted from 000 to 127 with the
DIAL or the (+) & (-) buttons.
4. Pressing the SYNTH button & the « NEXT » & « BACK » buttons simultaneously will reset
the parameters to the default value of 64 each. You can play the keyboard while simultaneously
changing the parameters, to hear the effect. (see « Parameters table for SYNTH »)
SYNTH
SYNTH
NEXT
BACK
1 2 3
4 5 6
7 8 9
- 0 +
1 2 3
4 5 6
7 8 9
- 0 +
NEXT
BACK
1 2 3
4 5 6
7 8 9
- 0 +