Operation Manual

11
USER MANUAL
STK-520
Modulation/Portamento
When you turn on the keyboard, the Modulation indicator appears in the display, indicates that the
Modulation mode is selected. You can play the voice vibrating over and over again in pitch on the
electronic keyboard by holding the
[MODULATION/PORTAMENTO]
button and play the keyboard.
When you release the
[MODULATION/PORTAMENTO]
button, the vibration function turns off
immediately.
To select the Portamento mode, you need to press the
[FUNCTION]
button to enter the «Key» menu,
for details please see the section «Function Select». You can play the voice sliding on the electronic
keyboard by holding the
[MODULATION/POTAMENTO]
button and play the keyboard. When you
release the
[MODULATION/PORTAMENTO]
button, the vibration function turns off immediately.
Note:
1.
To activate the Portamento effect, you need to hold the key and then play another key.
2.
When the Split mode is activated, the Portamento effect at the left section will not take efect.
Digital Signal Processor (DSP)
The Digital Signal Processor (DSP) consists of two units (Reverb and Chorus) which process the
Performances with Reverb and Chorus effects. To turn on/off the DSP, simply press the DSP button.
The Reverb and Chorus icon
BASIC OPERATION