Operation Manual

17
USER MANUAL
STK-520
6. Modulation/Portamento
Press the [FUNCTION] button as many time as necessary until «
ModU
» appear in the display, you can
use the
[-/NO]/[+/YES]
button to switch between
ModU(
modulation) or
PoRT
(portamento).
MIXER CONTROL
Press the [
MIXER
] button as many time as necessary until your desired track appear in the
display, you can use the
[-/NO]/[+/YE
S]
button to adjust the volume level of each track.
Track On Display Range Default Setting
Oc Volume
OC
0...31
23
Up Volume
UP
0...31
28
Drum
Volume
dR
0...31
23
Bass
Volume
bS
0...31
23
When you press the
[-/NO]
and
[+/YES]
buttons simultaneously, the keyboard will shut
down the volume of the selected track. Press the two buttons simultaneously again to turn
the accompaniment track volume on.
MEMORIZE PANEL SETTINGS
The keyboard has 6 memory pads which can be used to memorize the control-panel setups.
You can press one of the
MEMORY
button (
MEMORY button (MEMORY
M1-M6
) to recall the setups at any time.
Register the settings:
When you have fi nished the settings, you press and hold the
[STORE]
button, then press one of
the
MEMORY
button. Any data that was previously in the selected location is erased and
MEMORY button. Any data that was previously in the selected location is erased and MEMORY
replace by the new settings.
Note:
When you turn off the keyboard, the setting will be erased.
MIXER CONTROL