USER MANUAL DIGITAL PIANO STP-710
Using the Instruction Manual Thank you for purchasing this Digital Piano. The use of high technology and the most advanced sampling technique brings you high quality sound and enjoyment. The combination of digital piano and electronic keyboard features let you perform perfectly. We hope this skilfully built digital piano will able to explore your creativity, and brings you unlimited happiness and music enjoyment. Before you use the piano, we recommend you to read through this manual.
Contents Digital Piano Set-up Guide General Guide The Connectors - Using the AC power jack - Using Headphones - Using the AUX.OUT jack - Using the Foot Pedals - Using the MIDI IN/OUT ports Operation 1. Power Switch & Volume 2. Voice/Dual Voice 3. Metronome 4. DSP (Digital Signal Processor) 5. Transpose 6. Tempo 7. Touch Response 8. Record & Playback 9. Demo Song 10.
Digital Piano Set-up Guide 1. Open the package, and check whether the following parts are available: 1. Piano body 2. Music stand 3. Right leg component 4. Left leg component 5. Back panel skirt 6. Foot pedal unit 7. Hand screw (4 pcs.) 8. Screws (8 pcs.) 9. Screw caps (8 pcs.) 10. Power cable stabling hook (2 pcs.
Digital Piano Set-up Guide................Continued 2. Follow the illustration below and finish off the set-up procedures. A. Put the foot pedal unit(6) in between the left and right legs components (3&4), use 4 pieces of screws (2 on each side) to stable the legs onto the foot pedal unit. (Make sure the direction of the placement is correct before screwing) B. Use 4 pieces of screws (2 on each side) to tighten the back panel skirt (5) onto the assembly finished in Part A.
Digital Piano Set-up Guide................Continued C. Put the piano body(1) on the top of the assembly finished in part B, use 4 pieces of hand screws to stable afterward. D. After the initial set-up, stick the cable stabling hook(10) on the internal side of the leg component (see the below illustration for reference).
General Guide Top View Rear View Front View 1 2 3 4 5 6 Control Panel Footboard DIN socket MIDI IN/OUT DIN sockets AUX.
General Guide............Continued POWER SWITCH MASTER VOLUME DUAL DSP (Digital Signal Processor) TOUCH RECORD TRACK A TRACK B REPEAT METRONOME TRANSPOSE +/TEMPO +/DEMO ALL RECORD - PLAY - STOP 15 DEMO - SELECT - START/STOP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VOICE TYPE & DEMO SONG SELECT 0 - PIANO 1 1 - PIANO 2 2 - E.PIANO 1 3 - E.
The Connectors Using the AC power socket 1. Connect the power cable to the AC mains socket underneath the piano body. 3. Turn the volume control anti-clockwise to the minimum volume level. 2. Ensure the piano is turned off when connecting and disconnecting the power cable. 4. Plug the power cable into a proper AC mains power outlet 5. If you have done the above procedures you are now safe to turn on the piano.
The Connectors..................Continued Using the Foot Pedals Connect the DIN plug of the footboard to the “PEDAL” DIN socket on the rear panel. You will experience the sustain effect. Using the MIDI IN/OUT Ports MIDI stands for Musical Instrument Digital Interface. MIDI is a world wide standard that allows various electronic musical instruments and other devices to communicate with each other. MIDI IN: Data transmitted from other MIDI instruments via MIDI are received at this connector.
Operation 1. Power Switch & Volume 1. Turn the POWER switch on. The LED display lights up. Note: 2. Use the volume control knob to adjust the volume to your desired level If the LED display has not lit up after you turned on the piano, please check the power supply. If the piano is silent, the volume may be adjusted to its minimum level. 2. Voice/ Dual Voice Choose a voice by pressing one of the [VOICE] buttons.
Operation............Continued 4. DSP (Digital Signal Processor) Press the [DSP] button to turn on/ off the Digital Signal Processor. The LED display will clearly show the DSP status. 5. Transpose The Transpose function allows you to change the pitch of the instrument in semi-tone steps, up to a maximum of 12 semi-tones (one octave) above or below the standard pitch. To restore the normal Transpose position, press both the +/- buttons simultaneously. 6.
Operation............Continued 7. T ouch Response The digital piano features a touchsensitive keyboard. This function is a default setting when you turn on the piano. Pressing the [TOUCH] button repeatedly adjusts the touch response level from 1 to 3, where 2 is the default level. To cancel the touch response effect, press the [TOUCH] button until the LED display shows “OFF”. 8. Record & Playback Record Press the [RECORD] button. The indicator lights up.
Operation............Continued Repeat the playback During the playback, press the [REPEAT] button once to set the starting point of the repeated part you want to listen.“r-A” appears on the display. Then, press the [REPEAT] button again to set the ending point of the playback. "r-B" appears on the display and the recorded song is then played back repeatedly from point “r-A” to “r-B”. 9. Demo Song Select a Demo song Use the Voice button twice to select a Demo song. Press the Demo [SELECT] button.
Operation............Continued Repeat the demo song To play a Demo song in loop, press the [REPEAT] button once to set the starting point of the repeated part you want to listen.“r-A” appears on the display. Then, press the [REPEAT] button again to set the ending point of the playback part."r-B" appears on the display and the recorded song is then played back repeatedly from point “r-A” to “r-B”.
MIDI The MIDI IN and MIDI OUT sockets, located on the rear panel of the unit, offer broadened musical possibilities through the use of MIDI. The following is the description of MIDI and how you can use MIDI with the piano. What is MIDI? MIDI stands for Musical Instrument Digital Interface. MIDI is a world wide standard that allows various electronic musical instruments and other devices, such as sequencers, computers, etc to "communicate with each other".
Specifications Keyboard Voice Demo Song Display Switch and Buttons Transpose Pedals Touch Response Connectors Speaker Dimensions (W*D*H) Weight 88 hammer action keys 10 Voices 20 Demo Songs LED POWER SWITCH, VOLUME SWITCH, DUAL, DSP, TOUCH, RECORD, TRACK A, TRACK B, REPEAT, METRONOME, TRANSPOSE +/-, TEMPO +/-, DEMO ALL, RECORD - PLAY/STOP, DEMO - SELECT/ START/STOP, VOICE SELECT 0-9 12 semi tones above or below standard pitch Soft, Sostenuto, Sustain Hard, Medium, Soft, Off DC POWER, HEADPHONES, AUX.
Voice List No Name of Voice Demo Song List 17 Name of Voice on Panel
V.040510 STAGGMUSIC.
