Warranty Guide
18
PROCEDURE A (For water-based, special
water-based and greasy, oil-based stains)
• Mix a solution of ¼ teaspoon of clear hand dishwashing
detergent with 1 cup of water. Stir gently.
• Apply detergent solution directly to a white cloth.
Dampen the carpet bers in the stained area
with the cloth. Avoid saturating the carpet.
• Wipe gently. Turn cloth frequently.
• Never rub, scrub or use a brush. This may damage carpet
bers. If necessary, use your ngertips to work the solution
to the base of the stain. Do not oversaturate carpet;
use small amounts of solution and blot frequently.
• Wet the stained carpet bers with clear,
lukewarm water to rinse.
• Cover the spot with an absorbent white towel
or paper towel and apply pressure to blot.
• Repeat the rinsing and blotting procedures until you are
sure all traces of the detergent have been removed.
• If the stain is gone, place an absorbent white
towel or paper towel over the area cleaned, and
weigh towels down with a heavy colorfast object,
such as a weighted plastic wastebasket.
• Change towels or paper towels until carpet dries.
• If stain remains, perform Procedure B (for coffee, tea or
urine, skip Procedure B and perform Procedure C).
PROCEDURE B (Do NOT use on coffee, tea or urine stains)
• Mix 2 tablespoons of non-bleaching, non-sudsing
household ammonia with 1 cup of lukewarm water.
• Apply ammonia solution, rinse and blot
as outlined in Procedure A.
• Do not dry with paper towels. Follow Procedure
C to neutralize the ammonia solution.
PROCEDURE C
• Mix ½ cup of white vinegar with 1 cup of lukewarm water.
• Apply vinegar solution, rinse and blot as outlined
in Procedure A.