Warranty Guide

PROCEDURE A (For water-based, special

water-based and greasy, oil-based stains)

• Mix a solution of ¼ teaspoon of clear hand dishwashing

detergent with 1 cup of water. Stir gently.

• Apply detergent solution directly to a white cloth.

Dampen the carpet bers in the stained area

with the cloth. Avoid saturating the carpet.

• Wipe gently. Turn cloth frequently.

• Never rub, scrub or use a brush. This may damage carpet

bers. If necessary, use your ngertips to work the solution

to the base of the stain. Do not oversaturate carpet;

use small amounts of solution and blot frequently.

• Wet the stained carpet bers with clear,

lukewarm water to rinse.

• Cover the spot with an absorbent white towel

or paper towel and apply pressure to blot.

• Repeat the rinsing and blotting procedures until you are

sure all traces of the detergent have been removed.

• If the stain is gone, place an absorbent white

towel or paper towel over the area cleaned, and

weigh towels down with a heavy colorfast object,

such as a weighted plastic wastebasket.

• Change towels or paper towels until carpet dries.

• If stain remains, perform Procedure B (for coffee, tea or

urine, skip Procedure B and perform Procedure C).

PROCEDURE B (Do NOT use on coffee, tea or urine stains)

• Mix 2 tablespoons of non-bleaching, non-sudsing

household ammonia with 1 cup of lukewarm water.

• Apply ammonia solution, rinse and blot

as outlined in Procedure A.

• Do not dry with paper towels. Follow Procedure

C to neutralize the ammonia solution.

PROCEDURE C

• Mix ½ cup of white vinegar with 1 cup of lukewarm water.

• Apply vinegar solution, rinse and blot as outlined

in Procedure A.