Installation Guide

14
www.surewood-lnl.com © 2013 SureWood-LNL All Rights Reserved
W
OOD
~
LNL
INSTALLATION
1. Attach rosette or half newel directly to handrail through the back of
rosette (A)
2. Secure handrail and rosette or half newel to wall with finish nails or
screws (B). Use wood plugs to plug screw holes.
3. Leave no less than 1-1/2” of space between wall and wall rail.
4. Secure wall rail to walls with handrail brackets. Be sure handrail
brackets are anchored into studs through dry wall.
5. If attaching fittings to ends of wall rail is preferred, use the same
method for attaching fittings from Step 3-2 on page 9.
9
6
ATTACHING HANDRAIL SYSTEMS TO WALL
FOR POST -TO-POST AND OVER-THE-POST RAIL SYSTEMS.
A
B
ATTACHING RAIL WITH A ROSETTE
Handrail
A
B
ATTACHING RAIL WITH A HALF NEWEL
Wall rail with brackets
Wall rail with miter cut ends
6010 rail with quarterturn fittings
6010 rail with 7009 Returned Ends
ATTACHING WALL RAIL
Miter Cutting Handrails
Handrail can be miter cut at the ends
and returned to the wall. In all instances
of attaching handrails to walls, handrail
brackets should be used to add strength
and structural support.